546068
66
Zoom out
Zoom in
Previous page
1/252
Next page
Check Action Refer to
Is “Control with HDMI” set to “On”? If the video image does not appear when “Control with
HDMI” is set to “On”,
change the setting to “Off” and power
on this unit and the external device again.
p. 50
Is the video image temporarily hidden? Press the [HIDE] button p. 25
3D images do not appear
Check Action Refer to
Do you see two images displayed side by
side?
Set “3D Format” to “Side by Side”
Video images in the “Side by Side” format may not be
recognized automatically in the case of 3D video images.
p. 33
Is an intermediate device (AV amplifier,
divider, etc.) in use?
Connect the source device to the projector directly, and
check whether there is any improvement in the condition.
If the condition improves, it is likely that this is not caused
by malfunction of the projector.
p. 22
Is the cable in use an HDMI-certified
cable?
Use an HDMI-certified high-speed cable.
Also, use as short a cable as possible.
p. 22
Is the power of the 3D GLASSES turned
on?
If you are using the PK-AG2 or PK-AG33D GLASSES, turn
on the power manually.
Check the
instruction
manual of the 3D
GLASSES and
3D SYNCHRO
EMITTER.
Are the 3D GLASSES charged? Check whether the PK-AG1 battery of the 3D GLASSES
has run out, and whether PK-AG2 and PK-AG3 are
charged.
Are the 3D GLASSES and 3D
SYNCHRO EMITTER too far away from
each other?
Position them at an appropriate distance.
3D video image looks unnatural
Check Action Refer to
Are there overlapping video images? If there are overlapping video images partially, this is due
to the crosstalk phenomenon.
In this case, adjust “Crosstalk Cancel” accordingly.
p. 34
If there are overlapping video images partially, this is due
to the crosstalk phenomenon.
This phenomenon often occurs when there are drastic
changes in the brightness.
In this case, set Lamp Power to “High”
p. 47
Video image looks unnatural
Colors are unnatural
Check Action Refer to
Is the color space of the input signal
correctly set?
The color may turn out unnatural when the input signal is
different from that in the projector setting.
Set the “Color Space” for “Input Signal” correctly.
p. 50
Is the image correctly adjusted? Adjust “Color” and “Tint” accordingly. p. 49, p. 50
Is the AV device properly connected? Connect the AV device properly. p. 22
* The video image may appear slightly reddish immediately after starting up. This is not a malfunction.
66
Troubleshooting
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DLA-X900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DLA-X900R in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DLA-X900R

JVC DLA-X900R User Manual - German, Dutch, Italian - 336 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info