546068
65
Zoom out
Zoom in
Previous page
1/252
Next page
Troubleshooting
Before sending the unit to your authorized dealer for repair, please check the following points.
The following symptoms are not malfunctions.
You do not need to worry about the following symptoms if there is no abnormality on the screen.
0
A part of the top or front surface of the unit is hot.
0
A creaking sound is heard from the unit
0
An operating sound is heard from the inside of the unit.
0
Color smear occurs on some screens
This unit is a digital device. This unit may become unable to operate normally due to external static or noise.
Perform the following operations when such malfunctions occur.
A
If the unit is in the Standby mode, pull out the power plug, followed by inserting it again
B
Press the A [STANDBY/ON] button on the main unit to turn on the power again
When “High Altitude Mode” is set to “On”, and “Lamp Power” is set to “High” during 3D mode, the fan will
make louder noise than usual since it is designed to run at high speed in 3D mode.
Power is not supplied
Check Action Refer to
Is the power cord disconnected? Insert the power cord (plug) firmly. p. 24
Is the lamp cover properly shut? If the unit is in the Standby mode, remove the power plug
and close the lamp cover
properly. After that, insert the plug
again.
p. 62
Is the lamp in the Cool-down mode? After exiting the Cool-down mode, turn on the power again. p. 26
Power shuts down automatically
Check Action Refer to
Has “ECO Mode” been configured? Set “ECO Mode” to “Off”. p. 59
Has “Off Timer” been configured? Set “Off Timer” to “Off”. p. 59
Are the air inlets and exhaust vent
blocked?
Leave proper clearance when installing the unit p. 14, 15
p. 19
Is the filter dirty? Clean the filter. p. 64
Video image does not appear
Check Action Refer to
Is the correct external input selected? Select the correct external input terminal. p. 25
Is the power of the AV device turned on? Turn on the power of the AV device and play the video. p. 22
Is the AV device properly connected? Connect the AV device properly. p. 22
Are the correct signals being output from
the AV device?
Set the AV device properly. p. 22
Is the cable in use an HDMI-certified
cable?
Use an HDMI-certified high-speed cable. Also, use as
short a cable as possible.
p. 22
65
Troubleshooting
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DLA-X900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DLA-X900R in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DLA-X900R

JVC DLA-X900R User Manual - German, Dutch, Italian - 336 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info