656267
12
Zoom out
Zoom in
Previous page
1/41
Next page
PELLET BURNING STOVES
INSTALLATION AND MAINTENANCE MANUAL
12
proper installation of the chimney. A descending wind always has the effect of relieving depression, sometimes inverting it. In
addition to the direction and force of the wind, the position of the flue and the chimney from the roof of the house and the
surrounding landscape is important.
The wind affects the operation of the fireplace also indirectly by creating zones overpressure and depression as well as the
outside, but inside the home. In areas directly exposed to the wind (2) can create an internal overpressure which can promote
the draft of stoves and fireplaces, but may be countered by external overpressure if the chimney is placed on the side exposed
to the wind (1). In contrast, in areas opposite to the direction of the wind (3) can create a dynamic depression that comes into
competition with the natural thermal depression developed by the fireplace, but can be compensated (sometimes) by placing
the exhaust duct from the side opposite to the direction of the wind (4)
IMPORTANT!
The operation of the pellet stove is noticeablysensitive to the conformation and position of the flue
which is adopted.Hazardous conditions can only be overcome bysuitable setting-up of the stove carried out
byqualified HANKS personnel.
2.10. HYDRAULIC CONNECTION
IMPORTANT!
The connection of the stove to the hydraulic system must be made ONLY by qualified personnel and
can perform the installation in “ART” and in compliance with all statutory and regulatory provisions in force and not in the
country of installation. If the installation of the stove requires interaction with another existing facility complete with
another heater (gas boiler, gas boiler, oil boiler, etc ...), is recommended for more qualified personnel who can then be
challenged to answer the Full compliance of the system, per the applicable law, and issuing the certificate. HANKS disclaims
any liability for damage to persons or property or in the event of failure or improper operation, if not complied with the
above warnings, and issued the necessary certificates of compliance enforcement work in an appropriate manner. It is
absolutely necessary that the network is designed properly sized to dispose of all the heat flux produced by the stove to
avoid raising the temperature inside the boiler.
3. INSTALLATION AND ASSEMBLY
3.1. DRAWINGS AND SPECIFICATIONS
3.1.1. Dimensions of Hydro stoves
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Just Fire NB-B18-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Just Fire NB-B18-I in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info