725503
18
Zoom out
Zoom in
Previous page
1/22
Next page
16
1. Remove the intake grille and then filter screen in the direction shown in the
following picture below;
2. Put the filter screen into neutral detergent water or warm water (about 40°C)
to clean, and then place in shade for drying;
3. Reinstall the cleaned filter screen;
4. Restart the machine, and it can run normally.
Note:
1. Do not use high temperature water (optimum temperature is around 40°C) or
harsh detergents (such as alcohol, petrol, benzene, etc.) to clean the filter screen.
2. In order to avoid filter screen deformation keep the keep filter screen away from
heat, and put in dry air for drying naturally;
3. Do not operate the machine whose filter has not been installed.
If the filter screen is not too dirty, just use a
vacuum cleaner to suck the dust.
If the filter screen is not too dirty, clean it with water
or warm water. The water temperature is about 40oC.
Filter screen
It’s recommended to cleaning the filter screen once every two weeks, if the
indoor air quality is poor, cleaning frequency shall be raised. Since the filter
becomes clogged with dust, the machine cooling effect will be reduced.
Specific cleaning steps are as follows:
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Just Fire AIRCO9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Just Fire AIRCO9000 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info