29
4 Permanent settings in programming mode
T Press the Rotary Switch to enter the programme item.
‘Units’
T Turn the Rotary Switch until ‘oz’ is displayed.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Units’
T Press the P button to exit programming mode.
In the programme item
‘Machine settings’ / ‘Factory setting’ the
machine can be reset to its factory setting: All user settings (apart
from the ‘filter’ and ‘water hardness’) are reset to factory settings.
Your JURA then switches off.
T Press the P button.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Turn the Rotary Switch until ‘Factory setting’ is displayed.
T Press the Rotary Switch to enter the programme item.
‘Factory setting’ / ‘Reset the machine to the factory set-
tings?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
Your JURA is switched off.
In this programme item you can set the language used by your
JURA.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
T Press the P button.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Press the Rotary Switch to enter the programme item.
‘Choose language’
T Turn the Rotary Switch until ‘Deutsch’ is displayed
Restore factory settings
Language
