27
4 Permanent settings in programming mode
In the programme item ‘Machine settings’ / ‘Save energy’ you
can permanently set an energy-saving mode (Energy Save Mode,
E.S.M.
©
):
U
‘Active’
U
Soon after the last preparation, the JURA stops heating up.
After about 5 minutes the message
‘Energy Save’ is dis-
played.
U
Before you can prepare a speciality coffee, speciality coffee
with milk, or hot water, the machine must heat up.
U
‘Inactive’
U
All speciality coffees, speciality coffees with milk and hot
water can be prepared without having to wait.
Example: Proceed as follows to change the energy-saving mode
from
‘Active’ to ‘Inactive’.
T Press the P button.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Turn the Rotary Switch until ‘Save energy’ is displayed.
T Press the Rotary Switch to enter the programme item.
‘Save energy’
T Turn the Rotary Switch until ‘Inactive’ is displayed.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Save energy’
T Press the P button to exit programming mode.
The harder the water is, the more frequently the JURA needs to
be descaled. It is therefore important to set the water hardness
accurately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
T Press the P button.
‘Maintenance status’
Energy-saving mode
Setting the water
hardness
