362675

Jura impressa x7 s Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
10
15.2 Programming Temperature
Ⅲ : ADJUST TEMPERATURE / SELECT PRODUCT
Ⅲ Press the required draw-off key.
Ⅲ : (selected product)
STAND. TEMP.
Ⅲ Select the required temperature with the keys or (high or
standart)
Ⅲ To store, press the key PROG.
Ⅲ : ADJUST TEMPERATURE / SELECT PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
15.3 Programming amount of water
Ⅲ : ADJUST WATER QUANTITY / SELECT PRODUCT
Ⅲ Press the required draw-off key.
Ⅲ : (selected product)
WATER 90 ML
Ⅲ You can change the value by pressing the key or .
Ⅲ To store, press the key PROG.
Ⅲ : ADJUST WATER QUANTITY / SELECT PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
15.4 Programming amount of milk
Ⅲ : ADJUST MILK QUANTITY / SELECT PRODUCT
Ⅲ Press the key or
Ⅲ : (selected product)
10 SEC.
Ⅲ You can alter the time by pressing the keys or (draw-off
time from 3 – 60 sec.)
Ⅲ To store, press the key PROG.
Ⅲ : ADJUST MILK QUANTITY / SELECT PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
15.5 Programming portion of hot water
Ⅲ Place a cup under the pivoting nozzle (18).
Ⅲ : HOT WATER PORTION / PRESS FOR HOT WATER
Ⅲ : ENOUGH HOT WATER ? / PRESS FOR HOT WATER
Ⅲ : HOT WATER PORTION / PRESS FOR HOT WATER
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
15.6 Programming water hardness
Ⅲ : WATER HARDNESS
LEVEL 3
Ⅲ Press the key PROG.
Ⅲ You can set the water hardness by pressing the keys or .
Ⅲ To store, press the key PROG.
+
-
+
-
+
-
+
+
+
+
-
+
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
To determine the water hardness, please read Chapter 8
“Setting the water hardness”
15.7 Programming CLOCK
Programming the clock is necessary if the function “Machine on” is
used.
Ⅲ : TIME.
—:—
Ⅲ Press the key PROG.
Ⅲ By pressing the keys or you can set the hours.
Ⅲ To store, press the key PROG.
Ⅲ By pressing the keys or you can set the minutes.
Ⅲ To store, press the key PROG.
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
15.8 Programming machine on
Programming the clock is necessary if the function “Machine on” is
used.
Ⅲ : UNIT
ON —:—
Ⅲ Press the key PROG.
Ⅲ By pressing the keys or you can set the hours.
Ⅲ To store, press the key PROG.
Ⅲ By pressing the keys or you can set the minutes.
Ⅲ To store, press the key PROG.
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
The display —:— means that the function is switched off.
15.9 Programming machine off
Ⅲ : UNIT OFF
5.0 HRS.
Ⅲ Press the key PROG.
Ⅲ By pressing the keys or you can set the hours (switched off
or 0.5 hrs. – 9 hrs.).
Ⅲ To store, press the key PROG.
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
15.10 Draw-offs
Ⅲ : AUDIT TRAIL (total audit trail)
Ⅲ Press the required draw-off key to inquire the draw-offs.
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
Draw-offs of steam cannot be inquired.
+
-
+
-
+
+
-
+
-
+
+
+
-
+
+
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura impressa x7 s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura impressa x7 s in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura impressa x7 s

Jura impressa x7 s User Manual - German - 16 pages

Jura impressa x7 s User Manual - Dutch - 15 pages

Jura impressa x7 s User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info