14
12.3 Maintenance
You can activate the following maintenance functions from this
program item:
RINSE MACHINE, CLEAN MACHINE, DE-SCALE MACHINE,
CHANGE FILTER.
“DE-SCALE machine” is not displayed if you are using a CLARIS
plus filter cartridge and the filter is set to “YES”.
“CHANGE FILTER” is not displayed if you are not using a
CLARIS plus filter cartridge and the filter is set to “NO”.
Ⅲ SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ RINSE
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ RINSE
MACHINE
Ⅲ Turn the Rotary Switch (4) until the required maintenance func-
tion (for selection see above) is displayed. Press the Rotary
Switch (4) to activate the function.
The Maintenance menu closes automatically after 5 seconds
if no function is selected.
12.4 Programming the amount of powder for coffee
and espresso
You can adjust the amount of powder for coffee and espresso
separately.
Ⅲ SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ POWDER
QUANTITY
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ SELECT
PRODUCT
Ⅲ Then press a product key of your choice.
Ⅲ NORMAL (example)
–
ⅥⅥⅥ
_ _ _ +
Ⅲ Now turn the Rotary Switch (4) until the required amount of
powder is set.
Ⅲ STRONG (example)
–
ⅥⅥⅥⅥ
_ _ +
Ⅲ Confirm the selected setting by pressing the Rotary Switch (4).
Ⅲ POWDER
QUANTITY
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ SELECT PRODUCT
