2480
13
Zoom out
Zoom in
Previous page
1/24
Next page
13
Before CLOSE TAP water may still escape the system.
12. Drawing off steam
To ensure perfect operation, clean the 2-stage frothing jet
(16) regularly. Screw the jet off as described. Hold the jet at
the top and at the bottom end and screw it apart (Fig. 18).
Thoroughly rinse the 3 parts under running water.
Make sure the nozzle has engaged properly. If the nozzle is
clogged with dried milk or has not been attached properly, it
might suddenly come off during operation.
Install the replaceable 2-stage frothing jet (Fig. 6). This is
included in your Welcome Pack. Do not replace the re-
placeable steam/hot water jet (16) directly after drawing off
steam, because the jet is hot after the draw-off operation.
Steam can be used for heating liquids and frothing milk for
cappuccino. Make sure that the replaceable steam/frothing jet
(16) is pushed upwards when liquids are heated. To froth
liquids, push the 2-stage frothing jet downwards, turning it
slightly.
During frothing some water will escape the system before
the actual frothing process. This does not affect the result,
e.g. when frothing milk.
At the start of the steam draw-off operation there can be
splashing The steam jet becomes hot. Avoid direct contact
with the skin!
READY
Place a cup under the 2-stage frothing jet (16) and immerse it in
the milk to be frothed or the liquid to be heated.
Press the steam pre-selection key (7).
HEATING
STEAM
To draw off steam, open the steam/hot water draw-off tap (15)
(Fig. 13).
The illuminated ring (2) is active.
You can adjust the steam draw-off time individually by turning
the Rotary Switch (1) until the required SEC are displayed.
For example, 35 SEC
If you do not change the steam draw-off time settings using the
Rotary Switch (1), the machine will use the settings last adjusted
During the steam draw-off operation, the message STEAM is
displayed
When the steam quantity is reached, the message SHUT TAP is
displayed
Close the steam / hot water draw-off tap (15).
READY
Before SHUT TAP, steam may still escape the system.
The machine is ready for steam draw-off for 40 seconds, i.e.
within this period you can draw off steam, stop the operation
and activate it again without having to heat the machine up
again. When the time has expired, press the steam pre-selec-
tion key (7) again.
13. Drawing off steam using
the Professional Cappuccino Frother (option)
The Professional Cappuccino Frother is optionally available.
Contact your authorized dealer.
E
13


Need help? Post your question in this forum.

Forumrules
1

Forum

jura-impressa-e80

Reset search

  • why do I get fill beans although full of beans? cannot go beyond that Submitted on 7-3-2021 at 15:08

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura Impressa E80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura Impressa E80 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura Impressa E80

Jura Impressa E80 User Manual - German - 25 pages

Jura Impressa E80 User Manual - Dutch - 25 pages

Jura Impressa E80 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info