12
12. Drawing off steam
Install the replaceable steam/frothing jet (Fig. 6). This is in-
cluded in your Welcome Pack. Do not replace the re-
placeable steam/hot water jet (13) directly after drawing off
steam, because the jet is hot after the draw-off operation.
Steam can be used for heating liquids and frothing milk for
cappuccino. Make sure that the replaceable steam/frothing jet
(13) is pushed upwards when liquids are heated. Push down
the frothing aid to froth liquids.
During frothing some water will escape the system before
the actual frothing process. This does not affect the result,
e.g. when frothing milk.
At the start of the steam draw-off operation there can be
splashing The steam jet becomes hot. Avoid direct contact
with the skin!
Ⅲ lights up
Ⅲ Place a cup under the steam/frothing jet (13) and immerse it in
the milk to be frothed or the liquid to be heated.
Ⅲ To draw off steam, open the steam/hot water draw-off tap
(Fig. 13).
Ⅲ flashes
Ⅲ When the steam quantity is reached, close the steam / hot water
draw-off tap (12).
Ⅲ lights up
13. Drawing off steam with the
Professional Cappuccino Frother
or Easy Cappuccino Frother
The Professional Cappuccino Frother and the Easy Cappuc-
cino Frother are optional. Please contact your authorized
dealer.
13.1 Attaching the Professional Cappuccino Frother
or the Easy Cappuccino Frother to the
IMPRESSA E10/20/25
Ⅲ Remove either the replaceable hot water jet (Fig.5) or the
replaceable steam / frothing jet (Fig. 6).
Ⅲ Now attach the Professional Cappuccino Frother or the Easy
Cappuccino Frother (Fig. 7).
Ⅲ Connect the milk tube with the Auto Cappuccino or the Easy
Cappuccino. (Fig. 10).
The separate milk container (optional) is ideally suited for
drawing in the milk. This is how you connect it to your
IMPRESSA E10/20/25 (Fig.8).
13.2 Making cappuccino and hot milk with the
Professional Cappuccino Frother
A little hot water may drip from the jet before you start
drawing off milk.
Ⅲ For cappuccino, turn the selector switch (1) (Fig. 9) to area (2).
Ⅲ For hot milk, turn the selector switch (1) (Fig. 9) to area (3).
Ⅲ Fill the milk container with milk (Fig. 8) or dip the milk tube
directly into the milk.
Ⅲ Place a cup under the Professional Cappuccino Frother.
Ⅲ Open the steam / hot water draw-off tap (Fig. 13) to draw off
steam.
Ⅲ flashes
Ⅲ Your cappuccino / hot milk is being prepared.
Ⅲ Close the steam / hot water draw-off tap (Fig. 12) when you
have drawn off sufficient steam
Ⅲ lights up
