28
4 Permanent settings in programming mode
In the programme item DISPLAY you can select the unit used for
the amount of water.
Example:Proceed as follows to change the unit for the amount of
water from
ML to OZ.
Precondition:
ESPRESSO is displayed (example).
O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
g T Turn the Rotary Switch until
DISPLAY is displayed.
k T Press the Rotary Switch to enter the programme item.
ML
g T Turn the Rotary Switch until OZ is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
DISPLAY
O T Touch the P symbol to exit programming mode.
ESPRESSO (example)
In the programme item
LANGUAGE you can select the language
used by your IMPRESSA.
Example: Proceed as follows to change the language from
EN
to
DE.
Precondition:
ESPRESSO is displayed (example).
O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
g T Turn the Rotary Switch until
LANGUAGE is displayed.
k T Press the Rotary Switch to enter the programme item.
EN
g T Turn the Rotary Switch until DE is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
SPRACHE
O T Touch the P symbol to exit programming mode.
ESPRESSO (example)
Unit for amount of water
Language
