27
4 Permanent settings in programming mode
Example: Proceed as follows to change the energy-saving mode
from
ENERGYw to ENERGY-.
Precondition:
ESPRESSO is displayed (example).
O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
g T Turn the Rotary Switch until
ENERGYw is displayed.
k T Press the Rotary Switch to enter the programme item.
SAVEw
g T Turn the Rotary Switch until SAVE- is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
ENERGY-
O T Touch the P symbol to exit programming mode.
ESPRESSO (example)
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time fol-
lowing the last action on the machine.
You can set the automatic switch-off to 15 minutes, 30 minutes
or 1–15hours.
Example:Proceed as follows to change the switch-off time from
2HRS. to 1HRS..
Precondition:
ESPRESSO is displayed (example).
O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
g T Turn the Rotary Switch until
OFF FROM is displayed.
k T Press the Rotary Switch to enter the programme item.
2HRS.
g T Turn the Rotary Switch until 1HRS. is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
OFF FROM
O T Touch the P symbol to exit programming mode.
ESPRESSO (example)
Automatic switch-off