467999
17
Zoom out
Zoom in
Previous page
1/34
Next page
17
ENA 5
1 CUP, the pre-set amount of water flows
into the cup, preparation stops automati-
cally.
READY
E It is also possible to prepare two cups of
pre-ground coffee. To this purpose place
two level measuring spoons of pre-ground
coffee into the filler funnel. Turn the Rotary
Switch to
2 CUPS and press to start
coffee preparation.
One-off setting before and during
preparation
The coffee strength can be changed before
preparation or during the grinding operation.
The following coffee strength options are possible
for 1 coffee:
Z Mild
Z Normal
Z Strong
E 2 coffees are always prepared with the
coffee strength ‘mild’.
E The pre-set amount of water can be
changed during the brewing operation by
turning the Rotary Switch.
One-off settings before and during coffee
preparation always follow this model. These
settings are not saved.
Example: Changing the coffee strength of
1 coffee before preparation from
NORMAL
to
STRONG.
Precondition:
READY appears on the display
and the coffee spout is set at the 1 cup position.
T Place the cup under the coffee spout.
g T Turn the Rotary Switch until STRONG is
displayed.
k T Press the Rotary Switch until STRONG is
displayed.
During grinding the coffee strength
STRONG is displayed.
1 CUP, the pre-set amount of water flows
into the cup, preparation stops automati-
cally.
READY
Entering a default setting for the amount of
water for a cup size
E A default setting can be entered for the
amount of water for 1 coffee. When
preparing 2 coffees this amount is
dispensed per cup.
Precondition:
READY appears on the display
and the coffee spout is set at the 1 cup position.
T Place the cup under the coffee spout.
k T Press the Rotary Switch and hold it down.
During grinding the strength of the coffee
is displayed.
k T Continue to hold the Rotary Switch down
until
ENOUGH COFFEE ? appears.
The coffee flows into the cup.
k T Press the Rotary Switch again when enough
coffee has been filled into the cup.
OK, the default setting for the amount of
water for one coffee has been entered.
READY
E This setting can be changed at any time by
repeating the above procedure.
Cappuccino with the Professional
Cappuccino Frother
Precondition: READY appears on the display
and the coffee spout is set to the 1 cup position.
T Remove the protective cover from the
Professional Cappuccino Frother.
T Connect the milk pipe to the nozzle.
T Insert the other end of the milk pipe into a
milk carton or connect it to a milk
container.
en
en
it
en
it
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura ENA 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura ENA 5 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura ENA 5

Jura ENA 5 User Manual - German - 32 pages

Jura ENA 5 User Manual - Dutch - 36 pages

Jura ENA 5 User Manual - French - 38 pages

Jura ENA 5 User Manual - Italian - pages

Jura ENA 5 User Manual - Spanish - pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info