Manual Junker JD36AE50 (page 25 of 56) (English, German, Dutch, French)

636919

Zoom out

Zoom in

1/56

Electrical connection

: Risk of electric shock!

Components inside the appliance may have sharp edges.

These may damage the connecting cable. Do not kink or pinch

the connecting cable during installation.

The required connection data can be found on the rating plate

inside the appliance; to do this, remove the metal mesh grease

filter.

Length of the cable: approx. 1.30 m

This appliance complies with the EC interference suppression

regulations.

: Risk of electric shock!

It must always be possible to disconnect the appliance from the

electricity supply. The appliance must only be connected to a

protective contact socket that has been correctly installed. If the

plug is no longer accessible once the appliance has been

installed, or a fixed connection is required, the installation must

have an all-pole isolating switch with a contact gap of at least

3 mm. Only an electrician may install the fixed connection. We

recommend installing a residual-current circuit breaker (RCCB)

in the appliance's power supply circuit.

Preparing the units

■ The fitted unit must be level and have sufficient load-bearing

capacity.

■ The max. weight of the extractor hood is 18 kg.

Appliance dimensions and safety clearances

■ Observe the appliance's dimensions.

■ Comply with the safety clearances.

If the installation instructions for the gas cooking appliances

specify a different distance, the largest distance must always be

provided for.

The fitted unit must be heat-resistant up to 90 °C. The fitted unit

must still be sturdy after the cut-outs have been made.

To install an upper cabinet, this extractor hood must be

provided with the following dimensions:

1. Make the cut-out for the exhaust air pipe. To do this, make an

opening in the ceiling or back wall of the fitted unit with an

additional recess for the power cord.

2. If the cabinet base is present, remove this. Mark the securing

points on the inside of the cabinet and pre-cut the holes

using a piercer. Use the enclosed template to mark the

securing points.

3. Screw in the four enclosed screws for the angle bracket up to

5 mm.

Preparing the appliance

A handle strip must be screwed to the filter pull-out. This handle

strip can be one that is provided with the appliance, or one that

is available as an accessory.

1. Use the screws provided to secure the handle strip to the

filter pull-out.

Width 600 mm

Depth Min. 320 mm

Height Min. 390 mm

PP

PP

[

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Junker JD36AE50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Junker JD36AE50 Manual

Product: