614754
11
Zoom out
Zoom in
Previous page
1/34
Next page
10
Needle up/down switch
· Every time the switch is pressed, the needle goes up or comes down.
This switch can be used when using needle threader or dropping the needle on the material.
· If the switch is continuously pressed, a needle will move slowly. Please use when sewing end
of fabrics.
Interruptor de aguja arriba/abajo
· Cada vez que se pulsa el interruptor, sube o baja la aguja.
Este interruptor se puede usar cuando se usa enhebrador de aguja o para bajar la aguja sobre
el material.
· Si se presiona continuamente el interruptor, la aguja se mueve lentamente. Sírvase usarlo
cuando cosa los extremos de la tela.
Bouton de relevage/abaissement de l’aiguille
· A chaque pression sur cette touche, l’aiguille remonte ou s’abaisse.
Cette touche s’utilise lors de l’utilisation de l’enfileur d’aiguille ou pour abaisser l’aiguille sur le
tissu.
· Lorsqu’on appuie continuellement sur cette touche, l’aiguille se déplace lentement. L’utiliser
lorsqu’on atteint l’extrémité du tissu.
Automatic thread trimming switch/Thread trimming foot switch
When the sewing is completed, both the needle and the bobbin threads can be simultaneously
trimmed. You can re-start sewing even if the bobbin thread does not appear on the throat plate.
Use either one of the two switches when trimming thread.
Interruptor del cortahilo automático/interruptor del pie del cortahilo
Cuando se completa el cosido, se pueden cortar simultáneamente los hilos de bobina y de
aguja. Usted puede reanudar el cosido aún cuando el hilo de bobina no aparezca en la placa de
agujas.
Para cortar el hilo use cualquiera de los dos interruptores.
Bouton de coupe automatique du fil/Interrupteur au pied de coupe du fil
Après la couture, il est possible de couper les fils d’aiguille et de canette en même temps. On
peut ensuite reprendre la couture même si le fil de canette n’apparaît pas sur la plaque à aiguille.
Pour couper les fils, utiliser le bouton ou l’interrupteur au pied.
Stitch length adjusting dial
Stitch length for normal stitching is 2 to 2.5 mm.
(Adjusting range: 0 to 6 mm)
Cuadrante de ajuste de longitud de puntada
La longitud de puntada de un cosido normal es de 2 a 2,5 mm.
(Gama de ajuste: 0 a 6 mm)
Cadran de réglage de la longueur des points
Pour la couture normale, la longueur des points est de 2 à 2,5 mm.
(Plage de réglage: 0 à 6 mm)
Mark
Marca
Repère
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki TL-98Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki TL-98Q in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info