614754
10
Zoom out
Zoom in
Previous page
1/34
Next page
9
Power switch
Turn ON when it is pressed on your side.
Turn OFF when it is pressed on the other side.
Interruptor de la corriente eléctrica
Se posiciona en ON cuando lo presiona en el lado hacia usted.
Se posiciona en OFF cuando lo presiona hacia el otro lado.
Interrupteur d'alimentation
Pour le mettre sur marche, appuyer dessus du côté opérateur.
Pour le mettre sur arrêt, appuyer dessus de l'autre côté.
Lamp switch
Open the cover of the face plate, and turn ON/OFF the lamp switch.
The lamp does not light up unless the power switch is turned ON.
Interruptor de la lámpara
Abra la cubierta de la placa frontal, y posicione a ON/OFF el interruptor de la lámpara.
La lámpara no se ilumina a menos que el interruptor esté posicionado en ON.
Interrupteur de la lampe
Pour accéder à l'interrupteur de la lampe, ouvrir le couvercle frontal.
Attaching the knee lifter lever
The knee lifter lever allows the operator to lift/lower the presser foot without releasing
his/her hand away from the material being sewn. (Lift of the presser foot: max. 12mm)
The knee lifter lever can be stored in the reverse side of the auxiliary table.
Modo de montar la palanca elevadora a rodilla
Con la palanca elevadora a rodilla la operadora puede subir/bajar el prensatelas sin
separar la mano del material que está cosiendo. (Elevación del prensatelas: Máx.
12mm) La palanca elevadora de rodilla se puede almacenar en el lado inbverso de la
mesa auxiliar.
Pose du levier de genouillère
Le levier de genoiuillère permet à l'opérateur de relever/abaisser le pied presseur
sans lâcher le tissu pendant la coutre. (Hauteur de relevage du pied presseur: 12mm
maxi) On peut ranger le levier de genouillère au dos de la table auxiliaire.
Manual thread cutter
Lift the needle and the presser foot after the completion of sewing, draw out the
material, and cut the thread with the manual thread cutter.
Cuchilla para corte manual de hilo
Eleve la aguja y el pie prensatela después de completar el cosido, extraiga el
material, y corte el hilo con la cuchilla para corte manual de hilo.
Coupe-fil manuel
Après la couture, relever l’aiguille et le pied presseur, retirer le tissu et couper le fil
avec le coupe-fil manuel.
Manual thread cutter
Cuchilla para corte
manual de hilo
Coupe-fil manuel
ON
MARCHE
OFF
ARRET
ON
MARCHE
OFF
ARRET
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki TL-98Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki TL-98Q in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info