614762
34
Zoom out
Zoom in
Previous page
1/70
Next page
33
1. Upper looper thread, blue markings
Place the spool on the spool holder pin as illustrated.
(1) Bring the thread up from the spool and lay it from the back to the front
into the guide.
(2) Thread the first machine guide.
(3) Slip the thread through the groove.
(4,5,6,7,8) Thread the guides, 4&5, follow the slit guide 6 then thread guide
7&8
(9) Turn the handwheel towards you until upper looper is in the position as
illustrated.
Thread the looper eye and place the thread underneath the presser
foot.
Note: Do not thread the upper looper when sewing with the upper looper
converter.
1. Oberer Greiferfaden, blaue Markierungen
Fadenspule anleitungsgemäss auf den Spulenhalterstift stecken.
(1) Faden von der Spule aufnehmen und von hinten nach vorne in die hrung
legen.
(2) Erste Maschinenführung einfädeln.
(3) Faden der Rille entlang führen.
(4, 5, 6, 7, 8) Faden in die Führungen (4&5) legen, der Schlitzführung (6)
entlang, dann in die Führungen (7&8).
(9) Das Handrad drehen bis sich der Obergreifer in der gezeigten Lage
befindet.
Greiferöhr einfädeln und den Faden unter den Nähfuss legen.
Hinweis: Bei Stichen die mit der Obergreiferabdeckung genäht werden,
wird der Obergreifer nicht eingefädelt.
1. Fil de boucleur supérieur, repères bleus
Enficher la bobine sur la broche conformément aux instructions.
(1) Prendre du fil à partir de la bobine et le faire passer par l’arrière dans le
guide.
(2) Enfiler le premier guide de la machine.
(3) Faire passer le fil le long de la rainure.
(4, 5, 6, 7,8) Guider le fil en suivant les différents points d’enfilage.
(9) Tourner le volant jusqu’à ce que le boucleur supérieur se trouve dans la
position indiquée.
Introduire le fil dans le chas du boucleur et faire glisser le fil sous le pied-
de-biche.
Indication: Quand les points nécessitent l’emploi du recouvrement du
boucleur supérieur, prière de ne pas enfiler le boucleur supérieur.
Threading 4/3 Thread OL /Nawlekanie 4/3-niciowego owerloka
Einfädeln 4/3 Faden OL / Enfilage du point de surjet à 4/3 fils
3
4
5
6
7
8
9
1
2
2
1. Nić górnej sczepiarki, niebieskie oznaczenia
Umieść szpulkę na bolcu uchwytu szpulki, jak na rysunku.
(1) Unieś nić ze szpulki i włóz ją od tyłu do przodu do prowadnicy
(2) Nawlecz pierwszą prowadnicę maszyny
(3) Przełóż nić przez bruzdę.
(4,5,6,7,8) Nawlecz prowadnice 4 i 5, poprowadź nić szczeliną 6, a następnie
nawlecz prowadnice 7 i 8
(9) Obracaj pokrętło w swoją stronę, aż sczepiarka znajdzie się w pozycji
.
jak na rysunku. Nawlecz oczko sczepiarki i umieść nitkę pod stopką.
i
Uwaga: Nie nawlekaj górnej sczepiarki do szycia z konwerterem.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-735 in the language / languages: German, Polish as an attachment in your email.

The manual is 19,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki MO-735

Juki MO-735 User Manual - English, French, Italian, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info