614762
57
Zoom out
Zoom in
Previous page
1/72
Next page
56
Practical Sewing Cover stitch / Costura práctica – punto de cobertura
Couture pratique avec le point enveloppant / Punto di copertura-cucito pratico
Simple hem
Stitch length: 3-4
Differential: N-2 (depending on fabric)
- Mark hem depth and fold or press.
- Place fabric under the foot and guide the
folded edge along a line on the stitch plate.
The hem is sewn and the raw edge on the
wrong side is neatened simultaneously. Sur-
plus seam allowance can be trimmed close
to the stitches if desired.
Ideal for all stretch fabrics.
Dobladillo sencillo
Largo del punto: 3-4
Diferencial: N-2 (según el material)
- Marcar la anchura del dobladillo y doblarlo
o plancharlo.
- Colocar la labor debajo del prensatelas y
guiar el borde doblado a lo largo de una línea
de la placa-aguja.
El dobladillo se cose y al mismo tiempo se
sobrehila el borde cortado por la parte de
abajo de la labor. Después de la costura
recortar la añaditura que sobresale-si fuese
necesario-a unos 2 mm.
Ideal para todos los materiales elásticos.
Flat joining seam
Stitch length: 3-4
Differential: N-2 (depending on fabric)
- Mark seam allowances.
- Turn or press under the edge of the upper
fabric (if not already neatened).
- Place edges on top of one another.
- Guide fabric edge along one of the side
sections of the foot.
When sewing on elastic or lace, place it on
the fabric and cover with the seam allowance.
The underside (raw edge) will be neatened.
If the seam allowance is more than 6 mm (1/
4"), it can be trimmed close to the stitches
after sewing.
Ideal for all hems and edges with elastic in
jerseys, knits and stretch fabrics. Suitable
for shaped pieces such as raglan sleeves,
curved inserts and bindings.
Costura de unión plana
Largo del punto: 3 – 4
Diferencial: N – 2 (según el material)
- Marcar la (s) añaditura (s) de la costura.
- Doblar o planchar la añaditura del borde
que solapa (si no estuviese ya sobrehilada).
- Colocar los bordes uno sobre el otro.
- Guiar el borde a lo largo del pie prensatelas
siguiendo una de las partes laterales.
Para colocar puntilla o elástico, poner la cinta
sobre la tela tapando la añaditura de la
costura. La parte de abajo (borde cortado)
se sobrehila. Si la añaditura de la costura
tiene más de 6 mm se puede recortar,
después de la costura, a unos 2 mm.
Ideal para todos los dobladillos y acabados
con elástico en jersey, vestidos de malla y
tejidos elásticos. Adecuado para piezas
moldeadas como p.ej. mangas raglán,
piezas redondas sobrepuestas, carteras.
Ourlet simple
Longueur de point: de 3 à 4
Mécanisme d’avance différentielle: de N à 2
(selon le matériel)
- Tracer les repères correspondant à la
profondeur de l’ourlet puis le rabattre ou
effectuer un prérepassage.
- Placer l’ouvrage sous le pied et guider le bord
plié en suivant une ligne de la plaque de
recouvrement du boucleur.
L’ourlet est cousu tandis que le bord coupé est
surfilé en même temps sur l’envers de l’ouvrage.
Ensuite, il est possible de couper les surplus
éventuels d’ourlet qui dépassent pour les
ramener à 2 mm.
Idéal pour tous les tissus élastiques.
Orlo semplice
Lunghezza del punto: 3-4
Differenziale: N-2 (a seconda del materiale)
- Segnare la larghezza dell’orlo, piegarlo oppure
stirarlo.
- Posizionare il materiale sotto il piedino e
guidare il bordo piegato lungo una delle linee di
riferimento sulla placca d’ago.
L’orlo viene cucito e contemporaneamente
rifinito sul rovescio della stoffa. Il margine
rimanente della stoffa può essere ritagliato fino
a 2 mm.
Ideale per tutti i tessuti elastici.
Couture d’assemblage plate
Longueur de point: de 3 à 4
Mécanisme d’avance différentielle: de N à 2
(selon le matériel)
- Tracer les repères des surplus.
- Si le bord du tissu est recouvert (au cas où il
n’est pas déjà surfilé) rabattre le surplus ou
effectuer un prérepassage.
- Superposer les bords.
- Guider le bord correspondant en suivant
latéralement une des pièces du pied monté
sur ressort.
Pour fixer une dentelle ou un élastique, poser
la bande sur le tissu et recouvrir le surplus. La
face inférieure (bord coupé) est surfilée.
Ensuite, il est possible de couper les surplus
qui dépassent pour les ramener à 2 mm.
Idéal pour tous les ourlets et bordures avec
élastique sur le jersey, les tricots et tissus
élastiques. Egalement recommandé pour les
manches raglan, les parementures arrondies
et les pattes.
Cucitura piatta
Lunghezza del punto: 3-4
Differenziale: N-2 (a seconda del materiale)
- Segnare i margini di cucitura
- Piegare o stirare il margine del bordo
sovrapposto (se non è già rifinito).
Sovrapporre i due bordi.
- Guidare il bordo lungo uno dei lati del piedino
- Attaccando pizzi oppure elstici il nastro viene
appoggiato sulla stoffa. Copre il margine di
stoffa. La parte inferiore (bordo tagliato) viene
rifinita. Se il margine di cucitura è più largo di 6
mm, si può ritagliare fino a 2 mm. (dopo il cucito).
Ideale per orli e rifiniture con elastico inserito
per jersey, maglieria ed altri tessuti elastici.
Molto adatta per maniche raglan, paramonture
curve e piatte.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-735 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki MO-735

Juki MO-735 User Manual - German, Polish - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info