614775
23
Zoom out
Zoom in
Previous page
1/52
Next page
Straight Stitch / Point droit / PESPUNTE RECTO
The straight stitch is the basic stitch.
Le point droit est le point de base.
El pespunte recto es el tipo de puntada más básica.
Begin sewing.
Commencez à coudre.
Empiece a coser.
Set the fabric and lower
the presser foot.
Place the fabric under the
presser foot so the needle
will enter the sewing start
point of the fabric. Pull both
the needle and bobbin
threads to the rear of the
machine and lower the
presser foot.
Adjust the sewing
speed.
Ajustez la vitesse.
Ajuste la velocidad de
costura.
Lightly hold the fabric
with your hands.
Be careful not to apply ex-
cessive pulling force to the
fabric while sewing.
Guidez légèrement le
tissu avec vos mains.
Faites attention de ne pas
tirer ou retenir le tissu
pendant la couture.
Sostenga ligeramente el
tejido con sus manos.
Evite tirar o empujar del
tejido mientras esté
cosiendo.
Stop sewing.
Arrêtez de coudre.
Pare de coser.
Select a stitch pattern.
Sélectionnez le
programme.
Seleccione el tipo de
puntada.
Make sure that the
presser foot is correct.
Vérifiez d’utiliser le bon
pied presseur.
Asegúrese de que el
prensatelas sea el
correcto.
Left needle
position
Center needle
position
21
1 4
3
2
7
6
Standard presser
foot (A)
Pied standard (A)
Prensatelas
estándar (A)
5
CAUTION:
Turn off the machine before changing
the presser foot.
ATTENTION:
Placez le tissu et abaissez le pied.
Mettez le tissu ou le pied afin que l’aiguille pénètre au point
de départ voulu. Tirez les deux fils vers l’arrière et abaissez
le pied presseur.
Coloque el tejido y baje el prensatelas.
Coloque el tejido bajo el prensatelas de forma que la aguja
empiece a coser allí donde desee. Tire de los hilos de la
canilla y de la aguja hacia atrás de la máquina y baje el
prensatelas.
Atención: Apague la máquina antes de cambiar el
prensatelas.
Posición
izquierda de
la aguja
Aiguille à
gauche
Aiguille au
centre
Posición
central de la
aguja
Eteignez la machine avant changer le
pied presseur.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZLE-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZLE-70 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info