614742
59
Zoom out
Zoom in
Previous page
1/72
Next page
57
Undo the basting stitch seam to the bottom of opening as shown
in the sketch given in step 1. Then, open the zipper.
Depuis le point de bâti du fond de l’ouverture, suivez les étapes.
1. puis, ouvrez la fermeture.
Quite el hilván de abajo a arriba tal y como explica el punto 1. A
continuación, abra al cremallera.
Aligning the teeth of either zipper tape with the groove on the
zipper foot, sew the zipper at the very edge of the teeth from the
end of opening while raising the teeth with fingers.
Alignez les dents avec la bande de la fermeture avec la fente
contre le pied, cousez au plus près des dents.
Alinee los dientes de la cremallera con el hendidura del
prensatelas de cremallera. Cosa la cremallera lo máximo al borde
de los dientes de la misma, desde el final de la apertura mientras
sube los dientes con los dedos.
Tape
Bande
Cinta de la
cremallera
Teeth
Dents
Dientes
Seam
Couture
Costura
Fabric
Tissu
Tejido
Invisible zipper foot
Pied fermeture invisible
Prensatelas de cremallera invisible
3
4
Put the invisible zipper on the fabric so that its center meets the
seam line. Place a cardboard between the seam allowance and
front fabric.
Manually baste both sides of seam allowances and zipper tapes.
Upon completion of basting, remove the cardboard.
Mettez la fermeture invisible sur le tissu afin que son centre
rencontre la ligne de couture. Placez du carton de renfort entre la
bande de tolérance et le dessus du tissu.
Bâtissez manuellement chacun des côtés de la bande de tolérance
et celle du zip.
Une fois terminé, retirez le renfort.
Coloque la cremallera invisible en el tejido de forma que el centro
coincida con la línea de costura. Coloque un cartón entre el
margen de la costura y el delantero del tejido.
Hilvane manualmente los dos lados de los márgenes de costura
de la cremallera.
Tras acabar de hilvanar, quite el cartón.
Invisible zipper
(wrong side)
Fermeture invisible
(envers)
Cremallera invisible
(del revés)
a
Cardboard
Carton renfort
Cartón
2
Basting
Bâti
Hilvanar
Fabric (wrong side)
Tissu (envers)
Tejido (del revés)
a: Basting (only zipper tape and seam allowance)
a: Bâti (bande du zip et tolérance seulement)
a: Hilvanar (solo la cremallera y el margen de la
costura)
Rijgsel
Karton
Stof (achterkant)
Onzichtbare rits
(achterkant)
a: Rijgsel (alleen ritsband en zoomoverlap)
Leg de onzichtbare rits op de stof met het midden op zoomlijn. Leg een
stukje karton tussen de zoomoverlap en de stof. Rijg beide
zoomoverlappen aan het ritsband. Verwijder vervolgens het karton.
Verwijder het rijgsel naar het ondereinde van de rits zoals in de tekening
bij (1) aangegeven. Vervolgens opent u de rits.
Onzichtbare rits-voet
Band
Zoom
Tanden
Stof
Geleidt de tanden van de ritsband door de ene groef van de voet en
naai de rits vlak langs de tanden van onder naar boven terwijl u de
tanden voorzichtig met de hand begeleidt.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E80 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info