614742
58
Zoom out
Zoom in
Previous page
1/72
Next page
56
Optional parts / Accessoires optionnels
Piezas opcionales / Optionele accessoires
Invisible zipper foot
Pied fermeture invisible
Prensatelas de puntada invisible
Since a seam does not appear on the right side of fabric, opening
can be finished with fabric edges neatly butted.
A fin qu’aucune couture apparaisse sur le devant du tissu, l’ouverture
doit être finie avec les bords du tissu rentrés à l’intérieur.
Como la costura no aparece en el lado derecho, la apertura puede
acabarse con los extremos del tejido remetidos.
Check the zipper opening size. Install the standard presser
foot (A).
Place two pieces of fabric face to face. Baste the fabric from the edge
of fabric to the opening end. At the opening end, change the stitch
length to [2.0] and sew reverse stitches by 1 cm and sew until the
predetermined position is reached. Neatly open the seam allowance.
Vérifiez la taille de l’ouverture du zip. Installez le pied standard
(A).
Placez les deux morceaux de tissu face à face. Bâtissez depuis le
bord du tissu jusqu’à l’extrémité de l’ouverture. Arrivé à celle-ci, réglez
la longueur du point à (2) et cousez en arrière sur 1 cm et cousez
jusqu’à la position prédéterminée. Ouvrez sur la tolérance de cou-
ture.
Comprobar el tamaño de la cremallera. Instalación del
prensatelas (A).
Coloque dos piezas de tejido encaradas. Hilvane el tejido desde su
extremo hasta su apertura final. En dicha apertura, cambie la longitud
de puntada a 2.0 y cosa con puntadas inversas durante 1 cm. A
continuación, siga cosiendo hasta que alcance la posición que desea.
Respete el margen de apertura de la costura.
Fabric (wrong side)
Tissu (envers)
Tejido (del revés)
Basting
Bâti
Hilvanar
Runstitch
Surpiqûre
Pespunte
Reverse stitch (1 cm)
Couture arrière (1cm)
Puntada inversa (1 cm)
1
2.5 cm
a: Apertura final
b: Tamaño apertura
c: Tamaño cremallera
a: Opening end
b: Opening size
c: Zipper size
a: Extrémité d’ouverture
b: Taille d’ouverture
c: Taille du zip
a
b
CAUTION:
Make sure to turn off the machine
before changing the presser foot.
ATTENTION:
PRECAUCIÓN:
Asegúrese de apagar la máquina
antes de cambiar el prensatelas.
Assurez-vous d’éteindre la machine
avant de changer le pied presseur.
Pattern to be used
Programme
Tipo de costura a utilizar
c
Onzichtbare rits-voet
Te gebruiken steek
VOORZICHTIG: Verwijder de stekker uit het stop-
contact voor u de voet verwisselt.
Omdat er geen naad verschijnt aan de bovenkant van de stof, kan de
opening afgewerkt worden met de stof die aan de binnenkant blijft.
Rijgsel
Stof (achterkant)
Stiksel
Retour steken (1 cm)
a: Openingseinde van de rits
b: Lengte van de opening
c: Ritslengte
Controleer de openingslengte van de rits. Plaats de standaard
naaivoet (A).
Leg twee stukken stof met de voorkant op elkaar. Rijg de stukken aan elkaar
van de rand van de stof tot het openingseinde van de rits. Bij dit
openingseinde verandert u de steeklengte naar 2,0 en doet u over 1 cm
retoursteken en naait u vervolgens weer naar het einde. Open de
zoomoverlap zorgvuldig.
00
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E80 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info