614738
60
Zoom out
Zoom in
Previous page
1/72
Next page
Rolled hemming foot
Pied ourlet roulé
Prensatelas de dobladillo de caracolillo
Piedino orlo rollato
2
1
Drawing ends of needle and bobbin threads, turn handwheel 3 or 4 turns by
hand to guide fabric to hemmer foot.
En maintenant les bouts des fils d’aiguille et de canette, tournez manuellement
le volant 3 ou 4 tours pour guider le tissu dans le pied. Cousez.
Sosteniendo los cabos de hilo de la aguja y de la canilla, gire manualmente
el volante 3 ó 4 vueltas para guiar el tejido hacia el prensatelas.
Mantenendo entrambi i fili dell'ago e della bobina ruotare il volantino della
macchina con la mano per tre o quattro giri, in modo che il tessuto inizi ad
orlarsi nel piedino.
Cut away a corner of fabric in order to make work easier.
Insert fabric into spiral groove in hemmer foot until needle position is reached.
Coupez un coin du tissu afin de pouvoir travailler facilement.
Insérez le tissu dans la spirale formée par le pied jusqu’à l’aiguille.
Para facilitar el trabajo, corte la esquina del tejido.
Coloque el tejido en la ranura en forma de espiral del prensatelas hasta que
se alcance la posición de agua.
Tagliare un angolo del tessuto per facilitare l'inizio della lavorazione.
Inserire il tessuto dentro la spirale della scanalatura del piedino orlatore sino
a raggiungere l'ago.
10cm
0.5cm
0.8cm
Fabric
Tissu
Tejido
Tesssuto
58
Fabric edge is hemmed while rolling it under.
Used for finishing bottom of shirts and blouses and edges of frills and handkerchiefs.
Le bord du tissu est ainsi roulé en dessous.
Permet de finir les bas de robes chemisiers et les bord des mouchoirs légers.
Se hace el dobladillo mientras se va enrollando.
Este tipo de dobladillo se utiliza a menudo en camisas y blusas.
Il tessuto viene orlato mentre il rollino finisce sotto la cucitura.
Viene impiegato per rifinire il fondo delle magliette blouses, bordi di fazzoletti.
CAUTION: Make sure to turn off the machine
before changing the presser foot.
ATTENTION:
PRECAUCIÓN: Asegúrese de apagar la máquina
antes de cambiar el prensatelas.
Assurez-vous d’éteindre la machine
avant de changer le pied presseur.
ATTENZIONE: Assicurarsi che la macchina sia
spenta, prima di sostituire il piedino.
Pattern to be used
Programme
Tipo de costura a utilizar
Modello da usare
Groove
Fente
Ranura
Scanalatura
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E61 in the language / languages: Italian as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki HZL-E61

Juki HZL-E61 User Manual - English, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info