614738
49
Zoom out
Zoom in
Previous page
1/72
Next page
47
3
Attach the zipper foot (B) to the machine.
To sew the left part of the zipper, place the zipper under the right
portion of the zipper foot. To sew the right part of the zipper, place the
zipper under the left portion of the foot.
Si la fermeture est à gauche de l’aiguille, la partie gauche du pied ira
sur le zip. Si la fermeture est à droite de l’aiguille, la partie droite du
pied ira sur le zip.
Coloque el prensatelas de cremallera (B).
Para coser la parte izquierda de la cremallera, coloque la cremallera
bajo la parte derecha del prensatelas. Para coser la parte derecha
de la cremallera, coloque ésta bajo la parte izquierda del prensatelas.
Applicare il piedino per cerniera lampo (B) alla macchina.
C ucire la parte sinistra della cerniera, posizionare la cerniera sotto la
parte destra del piedino. Cucire la parte destra della cerniera, poi
posizionare la cerniera sotto la parte sinista del piedino.
Zipper foot (B)
Pied fermeture éclair (B)
Prensatelas cremallera (B)
Piedino per cerniera lampo (B)
(Left)
(Gauche)
(Izquierda)
(Sinistra)
(Right)
(Dessus)
(Derecha)
(Destra)
lapped insertion / Fermetures recouvertes
Inserción recubierta / Inserimento con ricopertura
Open the seam allowance.
Neatly open the seam allowance. Adjust the back seam allowance so
that it projects 3 mm from the seam. Press with an iron to make a
crease. Fit the crease at the edge of teeth.
Recouvertes: Les fermetures sont insérées dans la couture
du vètement.
Le bord des dents suit la couture.
Coudre la fermeture du bas vers le haut au bord de la partie à rabattre.
Margen de apertura de la costura.
Debe existir un margen limpio. Establezca el margen de la costura
trasera de forma que quede a 3 mm de la costura. Aplique una plancha
para crear la doblez. Ajuste el dobladillo al extremo de los dientes.
Margine di apertura della cucitura.
Posizionare il bordo dei denti vicino alla cucitura.Stabilire un margine
di bordo tessuto di circa 3 mm. dalla cucitura. Con un ferro da stiro,
creare la piega corretta. Posizionare la piega vicino al bordo dei denti.
Fabric
(wrong side)
Tissu
(dessous)
Tejido (revés)
Tessuto
(lato sotto)
Zipper
opening size
Mesure
d’ouverture de
la fermeture
Tamaño de la
apertura de la
cremallera
Cerniera
misura aperta
Teeth
Dents
Dientes
Denti
Slider
Glisseur
Carro
Slitta
3mm
1
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E61 in the language / languages: Italian as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki HZL-E61

Juki HZL-E61 User Manual - English, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info