614738
13
Zoom out
Zoom in
Previous page
1/72
Next page
11
Speed controller
Push speed controller plug
into lower receptacle at right
end of machine.
During use of foot control-
ler, Start and Stop Button is
nonusable.
Rhéostat
Insérez la prise ’jack’ du
rhéostat dans son logement
à l’arrière de la machine.
Le rhéostat branché, le bou-
ton “marche/arrêt“ ne
fonctionne plus.
Power cord
Push power cord plug [1]
into upper receptacle at right
end of machine.
Plug [2] into electric outlet.
Cordon électrique
Insérez la prise du cordon
(1) dans son logement à
l’arrière de la machine.
Branchez (2) dans la prise
de courant.
Cable
Conecte el enchufe [1] en
el receptáculo que hay en
la parte inferior derecha de
la máquina.
Conecte el enchufe [2] a la
red eléctrica.
Cavo di alimentazione
Inserire la spina (1) del cavo
nell'angolo a destra in basso
della macchina.
nserire la spina (2) nella
presa della corrente
elettrica (220Volt.).
To run the machine press
foot speed controller. The
harder you press, the faster
machine will sew. To stop
machine, remove foot from
controller.
Pour actionner la machine,
appuyez sur le rhéostat.
Puls on appuie, plus la
vitesse est élevée (en
rapport avec la position du
curseur de vitesse). On
arrête la machine en
retirant le pied.
Pise el pedal para que la
máquina empiece a
funcionar. Cuanto más
fuerte sea la presión que
ejerce con el pie, más
rápida irá la máquina. Para
parar, simplemente deberá
de dejar de pisar el pedal.
Per partire in cucitura,
premere il pedale controllo
della velocità. Più si
premerà a fondo il pedale e
più la velocità aumenterà.
Per fermare la macchina
togliere il piede dal pedale.
[1]
[2]
Major Functions / Fonctions principales
FUNCIONES PRINCIPALES / FUNZIONI PRINCIPALI
Mains power and light
switch
Interrupteurs de courant
et de lumière
Interruptor de
encendido y de luz
Interruttore principale e
interruttore luce
ON
OFF
Pedal
Conecte el cable del pedal en el enchufe que hay en la
parte inferior derecha de la máquina. Durante el uso del
pedal,los botones de inicio y paro no funcionan.
Controllo della velocità
Inserire la spina del regolatore della velocità nella sede in
basso a destra. Durane l’azionamento del pedale controllo
velocità, non è possibile utilizzare il tasto Partenza/Fermo.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E61 in the language / languages: Italian as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki HZL-E61

Juki HZL-E61 User Manual - English, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info