614738
39
Zoom out
Zoom in
Previous page
1/52
Next page
If the stitches fail to reach the folded edge:
Si les points n’atteignent pas lebord du pli:
Si las puntadas no se dan en el extremo del
dobladillo:
If the stitches reach too far beyond the folded edge:
Si les points sont trop à l’intérieur du bord plié:
Si las puntadas se dan demasiado lejos del extremo
del dobladillo:
Move the width adjusting lever
to the left side a little (stitch
width become narrower).
Déplacer légèrement le levier
de réglage de largeur vers la
gauche (la largeur des points
diminue).
Mueva la palanca de ajuste de
anchura hacia el lado izquierdo
ligeramente (disminuirá la
anchura de la puntada).
Move the width adjusting lever
to the right side a little (stitch
width become wider).
Déplacer légèrement le levier
de réglage de largeur vers la
droite (la largeur des points
augmente).
Mueva la palanca de ajuste de
anchura hacia el lado derecho
ligeramente (aumentará la
anchura de la puntada).
37
Quilting attachment
Ensemble pour quilting
Mecanismo para acolchar
2
1
Two piles of fabric are stitched together with batting placed
between them to produce quilt with your original design.
Deux surfaces de tissu sont cousues ensemble avec un bâti
placé entre elles pour produire un quilt avec votre dessin
original.
Consiste en coser dos capas de tejido con relleno en medio.
Presser bar
Barre du pied
Barra del
prensatelas
Presser foot clamp screw
Vis de support
Tornillo del prensatelas
Remove presser foot
holder.
Lift presser bar, remove
presser foot clamp screw
and presser foot holder.
Retirez la vis du support.
Releves la barre du pied,
retirez le puis la vis du
support et celui-ci.
Quite el soporte del
prensatelas.
Suba la barra del prensatelas,
quite el tornillo y saque el
soporte.
Set the drop-feed knob
to “NOT FEED”.
Placer le bouton
d’entraînement par griffe
sur “NOT FEED”.
Fije la perilla de bajada
de transporte a “NOT
FEED”.
3
Install the quilting foot.
Installez le pied quilting.
Instale el prensatelas
para acolchar.
CAUTION:
Make sure to turn off the machine be-
fore changing the presser foot.
ATTENTION:
PRECAUCIÓN:
Asegúrese de apagar la máquina
antes de cambiar el prensatelas.
Pattern to be used
Programme
Tipo de costura a utilizar
Veillez à éteindre la machine avant de
changer le pied presseur.
* Adjust the width adjusting lever on condition that needle is
not stinging fabric.
* Régler le levier de réglage de largeur alors que l’aiguille ne
pique pas le tissu.
* Ajuste la palanca de ajuste de anchura en el estado en que
la aguja no esté pinchando el tejido.
How to adjust stitch width
Comment régler la largeur des points
Modo de ajustar la anchura de puntada
2003/08/21, 15:12Page 39
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E61 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki HZL-E61

Juki HZL-E61 User Manual - Italian - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info