614758
75
Zoom out
Zoom in
Previous page
1/120
Next page
73
4
Place the fabric underneath the presser
foot and lower the presser foot.
5
Adjust the presser foot height according
to the material thickness.
The height can be adjusted in two different ways.
I
n the case of free motion (Pattern No. Quilting 1),
the presser foot height for the oat function can
be adjusted with the stitch length adjusting dial.
Adjusting with the presser foot screw
.
The material can be moved smoothly with no resistance
by adjusting the presser foot height to about 1 mm
above the material.
Screw
1 mm
6
Use both hands to hold the fabrics and
move it without letting it loose.
The target stitch length is about 1.5 ~ 2.0
mm.
7
When free motion sewing is nished,
move the drop feed knob back to the left
side.
The feed dog will be up and engaged at the same time
as the machine starts to sew.
● How to lock stitches
1. At sewing start, pull up the bobbin thread on the top layer of the fabric, hold both needle and bobbin
threads together and sew 3 stitches on the same point. After that move fabrics as you wish.
In this way, stitches on the wrong side of the fabrics look neat.
2. At sewing-end sew 3 stitches on the same point and stop.
● How to sew stitches with the same stitch length
1. When the foot controller is used, the fabrics can be guided by both hands and you can move the fabrics
freely.
2. Set the speed controller to medium or medium low rst, press the foot controller completely and move the
fabrics.
-- if stitches become too large, set the speed controller to “faster”
-- if stitches become too small, set the speed controller to “slower”.
Tips
Height
increases
Height
decreases
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX5 in the language / languages: English as an attachment in your email.

The manual is 42,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info