614758
73
Zoom out
Zoom in
Previous page
1/120
Next page
71
*
To further avoid fabric shifts, set the presser foot
pressure lower.
Adjustment of presser foot pressure: Refer to page
29.
Setscrew for presser
foot holder
Actuating lever
Needle
clamp
1
Put top layer of fabric with patchwork and/
or appliqué, quilting cotton and bottom
fabric together by using pin or basting
stitches.
3
Place your hands to both sides of the
presser foot and sew by pulling the
fabrics apart.
* Sew with slow to medium sewing speed.
Quilting (straight stitch)
Quilting is the process of sewing the top layer of fabric, with
quilting cotton in between and a bottom layer of fabric under-
neath.
By using the walking foot, the machine feeds both top and
bottom fabrics together at the same time, so fabric shifting is
eliminated.
Pattern No.
Direct 1, 4
Presser foot Walking foot (N)
Setscrew for presser
foot holder
Presser bar
Presser foot
holder
2
Assemble the walking foot.
Raise the presser bar. Loosen the setscrew for press-
er foot holder and remove the presser foot holder.
(Refer to page 16)
Fit the actuating lever on the needle clamp. Then, t
the assembling point of the walking foot in the press-
er bar. Securely tighten the setscrew for presser foot
holder.
Assembling point
Attention
Turn OFF the power switch
before replacing the presser
foot.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX5 in the language / languages: English as an attachment in your email.

The manual is 42,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info