614756
63
Zoom out
Zoom in
Previous page
1/120
Next page
61
5
cm
0.7 to 1 cm
Basting
Reverse
stitches
Basting
stitches
Zipper
Fabric
(wrong side)
Fabric (right side)
Fabric
(right side)
5 cm
0.3 cm
Slider
Move up the
slider
1
Open the seam allowance.
Neatly open the seam allowance. Adjust the back
seam allowance so that it projects 3 mm from the
seam. Press with an iron to make a crease. Fit the
crease along the edge of the teeth.
2
Sew the zipper tape on the seam
allowance from bottom to top.
Fitting the edge of the zipper presser foot along the
edge of the zipper teeth, sew the zipper tape on the
seam allowance. At the slider part of the zipper, stop
the machine at 5 cm (2 inches) before the slider. Move
the slider to the far side of the presser foot and sew
the zipper until its top end is reached.
3
Put the fabric over the zipper.
Baste the zipper and set it on the fabric.
* Baste the zipper tape with the fabric with hand bast-
ing stitches.
Move the slider to the top of the zipper.
Put the fabric over the zipper and perform basting.
Zipper
Fabric
(wrong side)
Zipper opening size
1 cm
Teeth
Slider
0.3 cm
Crotch end
4
Sew reverse stitches and sew the right-
hand side.
After sewing reverse stitches, set the left hand side of
the zipper presser foot to the zipper teeth. Sew until
5 cm (2 inches) of the zipper end. Undo the bast-
ing stitches and move the slider to the far end of the
presser foot. Then sew the rest of the way.
Set on right
Set on left
Lapped insertion
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX series in the language / languages: English as an attachment in your email.

The manual is 42,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info