614756
62
Zoom out
Zoom in
Previous page
1/120
Next page
60
Inserting zippers
* Make sure to use center needle position
(Stitch pattern No. Direct 1).
(right) (left)
2
Attach the zipper presser foot (B) to the
machine.
When sewing the left side of the zipper, place the zip-
per under the right portion of the zipper presser foot.
When sewing the right side of the zipper, place the
zipper under the left portion of the foot.
1
Use the standard presser foot (A) to sew.
Place the fabrics face-to-face. Check the runstitching
length and the length of the zipper to be inserted. Ma-
chine baste the zipper onto the fabrics.
Machine basting = zipper opening length + 1 cm
Machine basting ...
Stitch length “4”
Crotch end
Reverse stitch (1cm)
Runstitching ... Stitch length “Automatic”
Preparation before attaching zipper
Pattern No. Direct 1
Presser foot
Zipper presser foot
(B)
Zippers are set in two different ways: by inserting into
the side seam of the garment and by centering in posi-
tion.
Attention
Turn OFF the power switch
before replacing the presser
foot.
Fabric
(wrong side)
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX series in the language / languages: English as an attachment in your email.

The manual is 42,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info