707751
46
Zoom out
Zoom in
Previous page
1/64
Next page
- Turn the fabric right side out,
stitch across the lower end
and right side of zipper.
- Stop about 5cm (2 inches)
from the top of zipper.
Remove the basting and open
the zipper. Stitch the
remainder of the seam.
Inserting a side zipper
- Place the right sides of the
fabric together. Sew a bottom
seam 2cm from the right edge
to the zipper bottom stop
position. Sew a few stitches in
reverse to lock. Increase the
stitch length to maximum, set
the tension below 2, and
baste the remaining length of
the fabric.
- Fold back to the left seam
allowance.
Turn under the right seam
allowance to form 3mm (1/8
inch) fold.
- Attach the zipper foot. Attach
the right side of the presser
foot pin to the holder when
sewing the left side of the
zipper. Attach the left side of
the presser foot pin to the
presser foot holder when
sewing the right side of the
zipper.
- Stitch the left side of zipper
from bottom to top.
5mm
2cm
Reverse
side
Reverse
stitches
Basting
stitching
46
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-70 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info