707751
45
Zoom out
Zoom in
Previous page
1/64
Next page
Zipper insertion
Inserting a centered zipper
Attention:
Zipper foot should be used for
sewing width center needle
position straight stitch only. It is
possible that needle could hit
the presser foot and break when
sewing other patterns.
This foot can be set to sew on
each side of the zipper, the The
edge of the foot guides the
zipper to ensure straight
placement.
- Place the right sides of the
fabric together. Sew a bottom
seam 2cm from the right edge
to the zipper bottom stop
position. Sew a few stitches in
reverse to lock. Increase the
stitch length to maximum, set
the tension below 2, and
baste the remaining length of
the fabric.
- Press open the seam
allowance.
Place the zipper face down on
the seam allowance with the
teeth against the seam line.
Baste the zipper tape.
- Attach the zipper foot. Attach
the right side of the presser
foot pin to the holder when
sewing the left side of the
zipper.
- Attach the left side of the
presser foot pin to the presser
foot holder when sewing the
right side of the zipper.
- Stitching around the zipper.
- Remove the basting and
press.
Note:
When sewing, be sure that the
needle does not touch the zipper,
otherwise the needle may bend
or break.
I
3.5
1.5~3.0
01
5mm
2cm
Reverse
side
Reverse
stitches
Basting
stitching
Basting
stitching
Reverse
side
45
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-70 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info