707751
14
Zoom out
Zoom in
Previous page
1/64
Next page
1. Place the thread and spool
cap onto the spool pin.
For smaller spools of thread,
place spool cap with the small
side next to the spool or use
the small spool cap.
2. Snap the thread into the
thread guide.
3. Wind the thread clockwise
around the bobbin winder
tension discs.
4. Place the thread end through
one of the inner holes in the
bobbin as illustrated and place
empty bobbin on the spindle.
5. Push the bobbin to right.
When the bobbin winder
spindle is pushed to the right,
the number display will blink on
and off while displaying " ".
It will disappear when the
bobbin winder spindle is
pushed to the left, which is the
"sewing position".
6. Hold the thread tail securely in
one hand.
7. Press on the foot control or the
Start/stop button to start
winding the bobbin.
8. After the bobbin has wound a
few turns stop the machine
and cut the thread near the
hole of the bobbin. Continue
filling the bobbin until it is full.
Once the spool is full, it rotates
slowly. Release the pedal or
stop the machine. Push the
bobbin winder spindle to left.
9. Cut the thread and then
remove the bobbin.
Winding the bobbin
Note:
- When the bobbin winder switch
is placed on the right "bobbin
winding position", the buttons
will not work. To start sewing,
push the bobbin winder switch
to the left "sewing position".
- If you find the bobbin winding
the thread unevenly, you can
adjust the height of the winder
tension disc (3) to improve it.
SP
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-70 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info