707751
13
Zoom out
Zoom in
Previous page
1/64
Next page
ON
OFF
Before connecting the power
supply, make sure that the
voltage and frequency shown on
the rating plate is conforming with
your mains power.
Place the machine on a stable
table.
1. Connect the power cord to the
machine by inserting the 2-
hole plug into the mains plug
socket.
2. Connect the power line plug to
the wall outlet.
Connect the foot controller
plug if you use.
3. Turn on the power switch.
4. The sewing lamp will light up
when the switch is turned on.
5. After switching off, it will take
some time to consume the
residual power in the circuitry.
The light does not turn off
immediately after switching off
the power. This is normal
phenomenon for an energy
efficient appliance.
Attention:
Always make sure that the
machine is unplugged from power
source and the main switch is off
("O"). when the machine is not in
use and before inserting or
removing parts.
Polarized plug information
Foot Control
This appliance has a polarized
plug (one blade wider than the
other), to reduce the risk of
electrical shock; this plug will fit in
a polarized outlet only one way. If
the plug does not fit fully in the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician to install the proper
outlet. Do not modify the plug in
any way.
With the sewing machine turned
off, insert the foot control plug into
its connector on the sewing
machine.
Turn on the sewing machine, and
then slowly depress the foot
control to start sewing. Release
the foot control to stop the sewing
machine.
Connecting the machine
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-70 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info