614555
30
Zoom out
Zoom in
Previous page
1/51
Next page
– 28 –
8. Function setting list
No. Item Description Setting range Default
Ref.
page
1 Soft start function The number of stitches to be sewn at a low speed when the soft-start
function is used at the start of sewing.
(* This setting is enabled when the thread clamp function is in the OFF
state.)
0 : The function is not selected.
1 to 9 : The number of stitches to be sewn under the soft-start mode.
0 to 9
(Stitches)
1
31
2 Material end sensor
function
Material end sensor function.
0 : Material end detection function is not operative.
1 : After detecting material end, the specied number of stitches (No. 4)
will be sewn, and the sewing machine will stop.
0/1
0
3 Thread trimming
function by material end
sensor
Thread trimming function by material end sensor.
0 : Automatic thread trimming function after detection of material end is
not operative.
1 : After detecting material end, the specied number of stitches (No.
4) will be sewn, and the sewing machine will stop and perform auto-
matic thread trimming.
0/1
0
4 Number of stitches for
material end sensor
Number of stitches for material end sensor.
Number of stitches from detection of material end to stop of the sewing
machine.
0 to 19
(Stitches)
5
5 Flicker reducing function Flicker reducing function
0 : Flicker reducing function is not operative.
1 : Flicker reducing function is effective.
0/1
0
31
* 7 Unit of bobbin thread
counting down
Unit of bobbin thread counting down
0 : 1 Count/10 stitches
1 : 1 Count/15 stitches
2 : 1 Count/20 stitches
0 to 2
0
* 8 Sewing speed of re-
verse feed stitching
Sewing speed of reverse feed stitching is set.
150 to 3,000
(sti/min)
1 9 0 0
12 Optional switch function
selection
Switching of function of optional switch.
o P T _
31
* 13 Function of prohibiting
start of the sewing ma-
chine by bobbin thread
counter
Function of prohibiting start of the sewing machine by bobbin thread
counting
0 : When counting is out (-1 or less) Function of prohibiting start of the
sewing machine is not operative.
1 : When counting is out (-1 or less) Function of prohibiting start of the
sewing machine after thread trimming is operative.
2 : When counting is out (-1 or less), the sewing machine stops once.
Function of prohibiting start of the sewing machine after thread
trimming is operative.
0 to 2
0
15 Thread clamp function
at the start of sewing
Operation of the thread clamp at the start of sewing is set.
0 : Thread clamp does not operate
1 : Thread clamp operates
0/1
1
21 Function of automatic
presser foot lifting at
pedal's neutral position
Function of lifting presser foot when the pedal is in neutral position.
0 : Function of neutral automatic presser lifting is not operative.
1 : Selection of function of neutral presser lifting.
0/1
1
22 Needle up/down correc-
tion switch changeover
function
Function of the needle up/down correction switch is changed over.
0 : Needle up/down compensation
1 : One stitch compensation
0/1
0
35
25 Thread trimming oper-
ation after turning the
handwheel by hand
Thread trimming operation after moving the needle away from its upper
or lower position by turning the handwheel by hand is specied.
0 : Thread trimming operation is carried out after turning the handwheel
by hand.
1 : Thread trimming operation is not carried out after turning the hand-
wheel by hand.
0/1
1
* 27 Thread clamp sewing
speed
The sewing speed when the thread clamp operates is set.
100 to MAX
(sti/min)
3 0 0
29 Back-tack initial opera-
tion time
This function sets the suction time of initial motion of back-tack solenoid.
50 to 500
(ms)
2 5 0
35
30 Function of reverse feed
stitching on the way
Function of reverse feed stitching on the way
0 : Normal one-touch type reverse feed stitching function
1 : Function of reverse feed stitching on the way is operative.
(In the case the function of reverse feed stitching on the way is enabled,
function No. 26 cannot be used.)
0/1
0
35
31 Number of stitches of
reverse feed stitching on
the way
Number of stitches of reverse feed stitching on the way
0 to 19
(Stitches)
4
35
32 Effective condition of
reverse feed stitching on
the way when the sew-
ing machine is stopping.
Effective condition of reverse feed stitching on the way
0 : Function is not operative when the sewing machine stops.
1 : Function is operative when the sewing machine stops.
0/1
0
35
33 Thread trimming
function by reverse feed
stitching on the way
Thread trimming function by reverse feed stitching on the way
0 : Automatic thread trimming function after completion of reverse feed
stitching on the way is not operative.
1 : Automatic thread trimming after completion of reverse feed stitching
on the way is performed.
0/1
0
35
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to
change the set value, please purchase the Engineers Manual and follow the instructions.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info