614555
28
Zoom out
Zoom in
Previous page
1/51
Next page
– 26 –
7. Production support function
The production support function enables "sewing counting", "bobbin-thread counting" and "number of
stitches counting".
1) When switch 󱀘 is pressed while the sew-
ing machine is in the sewing state, the product
support function is invoked.
At this time, LEDs , , and light up.
2) Every time switch 󱀘 is pressed, the
function display will be changed over in the
order of the "sewing counting function", the
"bobbin-thread counting function", the "number
of stitches counting function" and the "sewing
state".
* Sewing counting function (LED lights up)
The value indicated on the counter is increased every time the preset number of times of thread trimming
is reached.
It is possible to prohibit the sewing machine from starting when the value indicated on the counter reach-
es the preset one, if desired.
* Bobbin thread counting function (LED lights up)
The number of stitches sewn is detected. The preset value indicated on the counter is subtracted accord-
ing to the detected number of stitches.
Once the value indicated on the counter becomes a negative value, the bobbin thread has to be replaced.
* Number of stitches counting function (LED lights up)
The number of stitches is counted from the start of sewing until thread trimming is carried out.
[Sewing counting function]
1) Counted value is indicated on display section A.
2) The value on the counter can be changed by
pressing and switches .
3) The value on the counter is reset to 0 (zero) by
pressing switch 󱀔.
4) The sewing counting function setting can be
changed by keeping switch 󱀘 held
pressed (for two seconds).
5) The function setting changing operation is n-
ished by pressing switch 󱀘.
The setting items which can be changed are as follows:
* No. 181 ..... Target number of products
* No. 182 ..... Operation to be carried out when the target number of products is reached
0 : No operation
1 : Sewing machine operation is disabled
When the value on the counter equals to the target number of products, the sewing ma-
chine will not run even if the pedal is depressed. At this time, the display automatically
changed to “sewing counter function”. To release the sewing machine from the disabled
state, the value on the counter is reset to 0 (zero) by pressing switch 󱀔.
* No. 183 ..... The number of times of thread trimming to be carried out during one sewing sequence
The number of times of thread trimming for stopping the sewing counter is set.
󱀔
󱀘 󱀙
󱀘
Display section A
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info