30210

JRpropo XP8103 Manual

114
Zoom out
Zoom in
Previous page
1/142
Next page
GLID 113
3.12 Input Selection, cont.
Dual rates are available for the aileron, elevator and rudder
channels of your R/C glider. The amount of travel is adjustable
from 0-125%; exponential is adjustable from 0% (LIN) to 100% in
1% increments. The factory setting, or default value, for both the
0 and 1 switch positions is 100%. Either switch position may be
selected as the low or high rate by placing the switch in the
desired position and adjusting the value accordingly.
Dual rates can be defined as the ability to vary the travel or
throw rate of a servo from a switch. Due to differing travel rates,
you will find that the sensitivity of the control either increases or
decreases accordingly. A higher rate, or travel, yields a higher
overall sensitivity. You may find it easier to think of the Dual Rate
Function as double-rated or half-rates.
The Dual Rate Function works in conjunction with the Exponential
Function to allow you to precisely tailor your control throws.
In Function Mode, use the UP or DN key to select Dual Rate and
access by pressing the UP and DN keys simultaneously.
AILE Aileron
ELEV Elevator
RUDD Rudder
Dual rate switch position
4.1 Dual Rate, Exponential (Function Mode)
4. Function Mode Functions
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Current Flap Channel Input
Pot 6: Flap Knob
FLP.SW+PG: Flap Switch
and Pot 6
Press the DN and Select keys
simultaneously to access the
Function Mode list display
Increase or
decrease Dual
Rate Value
Channel Selection
(Aile, Elev, Rudd,
Auto Rudd)
Reset Dual Rate
Value to 100%
DN
SELECT
CH CH CLEARUP
To Reverse Switch
function
Function Select
(Dual Rate or
Exponential)
To Servo Output
Indicator
Press either the
+ or - key to
select Pot 6 or
FLP.SW +P6
Press to reset
Flap input to
Pot 6
DN
SELECT
CH CH CLEARUP
To Model Select
function
To Wing Type function
Press the UP and DN keys
simultaneously to enter/exit
the System Set-Up Mode
Press the DN and Select keys
simultaneously to access the
System Mode info display
… 114 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XP8103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XP8103 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info