30210

JRpropo XP8103 Manual

78
Zoom out
Zoom in
Previous page
1/142
Next page
HELI 77
4.7 Throttle Hold (Function Mode)
The Throttle Hold Function holds the throttle servo in a specific
position when the switch is activated. This is very useful for
practicing autorotation landings. The throttle hold switch is
located on the top right corner of the transmitter. The throttle hold
function is ON in the forward switch position; in the rear
position, the throttle hold function is OFF.
The factory setting for the throttle hold is inhibited. Pressing either
the + or - key will adjust the throttle hold value.
Using the + or - key, adjust the throttle hold value to deliver the
proper engine RPM for your helicopter. The adjustable range is
--20 through +50%. To shut the engine off during an
autorotation, a negative value may have to be input.
In Function Mode, use the UP and DN keys to select Thottle
Hold and access by pressing the UP and DN keys
simultaneously.
4.6 Stunt Trim (Function Mode), cont.
Initail setting
(inhibit)
When the Hold switch
is in the "ON" position,
the display flashes "ON"
CLEAR
Press CLR key to
inhibit the Throttle
Hold function
Press either + or - key to
activate and
Increase/Decrease value
or
Throttle Hold Position
Value (-20 – +50%)
ON
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Press the DN and Select keys
simultaneously to access the
Function Mode List Display
Press to increase or
decrease the mixing
value (
±
125%)
Press to reset the
mixing value at the
arrow to the factory
pre-set (0) or to
inhibit the Stunt
Trim function
DN
SELECT
CH CH CLEARUP
To Throttle Hold
function
To Travel Adjust
function
Press to move
the arrow to the
channel to be
adjusted
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Press the DN and Select keys
simultaneously to access the
Function Mode List Display
Press either the +
or - keys to set the
Throttle Hold value
(-20% – +50%)
Press CLR to return
the Throttle Hold
function to the
factory pre-set
inhibited (Off)
position
DN
SELECT
CH CH CLEARUP
To Throttle Curve
function
To Stunt Trim
function
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XP8103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XP8103 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info