30210

JRpropo XP8103 Manual

31
Zoom out
Zoom in
Previous page
1/142
Next page
ACRO 30
3.8 Data Reset (System Set-Up Mode)
The Data Reset Function allows you to reset all the functions and
settings for the current model to the factory pre-set conditions.
Resetting does not affect the data already programmed for other
models. Be sure to confirm that you need to reset the data of the
currently indicated model in order to prevent accidental loss of
valuable data.
Note: If a model name has been input and is reset, the model
name will not be removed, only the data. Please refer to the
Model Name Function for information on how to change the
model's name.
To access Data Reset, select Model Reset in System Set-Up and
press the UP and DN keys simultanelously.
model number to
be reset
3.7 Model Type Selection (System Set-Up Mode)
The XP8103 is capable of performing as a helicopter, airplane
or glider radio with full functions for each.
It can also memorize data for 10 models individually.
Note: If the power switch is turned OFF immediately after
selecting the new model type, the change will not be saved.
To change and save the model type press the UP or DN keys, or
press UP and DN keys or DN and SEL keys simultaneously. At
this time, existing model data is replaced by the model type
aircraft data selected. Be sure to confirm the model name to
prevent accidental loss of your important data. To cancel this
function, return to former model type or turn the power switch
OFF.
Note: When you select helicopter or glider model type on this
transmitter, allocation of lever switches, etc., will also change.
Please refer to the helicopter or glider section of this instruction
manual for their functions.
In System Set-Up Mode, select the Type Select Function and
simultaneously press the UP and DN keys to access
DN
SELECT
CH CH CLEARUP
Press simultaneously to
change and save model
type
Press the DN and Select keys
simultaneously to access the
system mode info display
To Data Reset
function
Model number
Model name (if blank,
no model name has
been stored)
Helicopter
Airplane
Glider
Arrow indicates
existing model
type
To Model Name function
Press to move
arrow and select
model type
DN
SELECT
CH CH CLEARUP
Press simultaneously to
exit the System Set-Up
Mode
To Modulation Select
function
To Model Type Select
function
Press to return to
factory preset data
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XP8103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XP8103 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info