30210
20
Zoom out
Zoom in
Previous page
1/142
Next page
XP8103 19
5.9 Screen Contrast Adjustment
The screen contrast adjustment feature of the XP8103 allows the
user to select the proper tint of the screen for improved clarity
and visibility in all weather conditions and temperatures.
To increase the contrast (darken the screen), simply turn the
power switch ON and press the SEL and DATA + keys
simultaneously. To decrease the contrast (lighten the screen),
press the SEL and DATA - keys simultaneously.
5.10 Installation Requirements
It is extremely important that your radio system be correctly
installed in your model. Here are a few suggestions on the
installation of your JR equipment.
1. Wrap the receiver in protective foam rubber that is no less
than 3/8 inch thick. Secure the foam to the receiver with #64
rubber bands. This protects the receiver in the event of a crash
or a very hard landing.
2. The servos should be mounted using rubber grommets and
brass bushings to isolate them from vibration. Do not over-tighten
the mounting screws — this will negate the vibration absorption
effect of the rubber grommets. The diagram at left will assist you
in properly mounting your servo.
The brass bushings are pushed from the bottom up in the rubber
grommets. When the servo screw is tightened securely, it
provides the proper security, as well as the proper vibration
isolation, for your servo.
3. The servos must be able to move freely over their entire
range of travel. Make sure that the control linkages do not bind
or impede the movement of any of the servos.
4. Mount all switches away from the engine exhaust and away
from any high vibration areas. Make sure each switch operates
freely and is able to operate over its full travel.
5. Mount the receiver antenna firmly to the airplane to ensure
that it will not become entangled in the propeller or control
surfaces.
Screw
Servo Mounting Tab
Brass Bushing
Rubber Grommet
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XP8103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XP8103 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info