Manual JRpropo XP8103 (page 16 of 142) (English)

30210

Zoom out

Zoom in

1/142

Elevator Tension Screw

Aileron Tension Screw

Throttle Tension Screw

Rudder Tension Screw

The XP8103 allows you to adjust the control sticks’ length.

To adjust the stick length, use the 2 mm Allen wrench (supplied

with your XP8103 transmitter) to unlock the set screw.

Note: Turn the wrench counterclockwise to loosen the screw.

Then, turn the stick clockwise to shorten or counterclockwise to

lengthen.

After the control stick length has been adjusted to suit your ﬂying

style, tighten the 2 mm set screw.

If you desire longer sticks, JR offers a thicker stick (JRPA047) that

is approximately one inch longer than the standard stick. This

stick, crafted from bar stock aluminum, is available at your local

JR dealer.

Remove the transmitter RF module, Nicad battery, and six (6)

transmitter back cover screws. Remove the transmitter back,

being careful not to bend or damage the RF module pins. Adjust

each screw for the desired tension (counterclockwise to loosen

stick feel, clockwise to tighten stick feel). When adjusting the

throttle ratchet tension, make sure the adjusting screw does not

touch the PC board after the adjustment is complete.

XP8103

5.1 Control Stick Length Adjustment

5.2 Control Stick Tension Adjustment

Loosen

Tighten

5. General Information

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XP8103 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JRpropo XP8103 Manual

Product: