606954
81
Zoom out
Zoom in
Previous page
1/112
Next page
79
Telemetry▋System【TELEMETRY】
Function▋Explanation
This allows conrmation of the telemetry sensors present in a particular aircraft, gathering
information such as Receiver Voltage, Altitude, Temperature or Propeller or rotor blade r.p.m.,
etc. In addition to the data on the display, alarms are used, so as aircraft conditions can be
monitored without taking your eyes o󰮏 the aircraft.
Setting▋Method
Receiver▋battery▋(RX-BATT)▋/▋
▋No▋Link▋Alarm▋(NO▋LINK▋ALARM)
Receiver battery alarm
This function alerts to a drop in receiver battery voltage. Initially it is
inhibited. To activate, set the alarm Voltage between 3.0V – 9.0V in 0.1V
increments.
No Link Alarm
This will warn when the transmitter is no longer receiving data from the model. Initially it is set as inhibited.
Set the delay after which the alarm should sound to either 10S (10 seconds), 15S (15 seconds), 20S (20
seconds), 30s (30 seconds).
Temperature▋(TEMPERATURE)
Unit (SCALE)
This selects the units for temperature display - Celcius ( °C) or
Farenheit (°F). Select the units as desired.
Alarm (ALARM)
This sets the temperature at which the alarm will sound – between 30
and 500°C. Initially this alarm is inhibited. Set the temperature to the
desired alarm point.
Revolutions▋Per▋Minute▋(RPM)
Sensor type
Select the Rotation Sensor type depending on usage.
Magnetic Sensor (MAGNETIC)
By using the Magnet on Rotation object to sense the rotation.
Optical Sensor (OPTICAL)
By using the optical sensor which detect the obstruction of the
light per propeller blade.
Motor Pulse Sensor (MOTOR)
By detecting the Pulse signal on the brushless motor to sense the
rotation.
Gear Ratio (GEAR RATIO)
It is possible to monitor the Helicopter’s actual rotor blade r.p.m. by entering the gear ratio. Check the gear
ratio for each Helicopter by checking your manual. Initially it is set as inhibited. Set the necessary numerical
value. Gear Ratio can be set between 1.00 〜 20.00 in 0.01 increments.
Number of Blade (PROPELLER)
It is possible to monitor an Airplanes actual Propeller r.p.m by installtion of an optical sensor. It is necessary
to input the number of blades for the propeller in order to have actual Propeller r.p.m displayed. Initially, it is
inhibited. The number of Propeller blades can be set between 1-20.
Delay (DELAY)
It is possible to display and store the maximum r.p.m. recorded in each ight mode. However, when the ight
mode is changed, the sensor may immediately store a maximum value, which would be invalid. To avoid storing
incorrect r.p.m. data, this function allows rpm to stabilise before storing any data. Initially it is set to inhibited.
Set the desired numerical amount which would suit your model. The delay can be set from 0.5s (0.5 seconds) ~
10.0s (10 seconds) in 0.5 seconds increments.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
System▋List
Receiver Battery
Voltage
Temperature
Variometer
Motive Power Battery
(Voltage/Capacity)
Rotation Speed
Altitude
Receiver Battery
Voltage
Temperature
Variometer
Motive Power Battery
(Voltage/Capacity)
Rotation Speed
Altitude
Receiver Battery
Voltage
Temperature
Variometer
Motive Power Battery
(Voltage/Capacity)
Rotation Speed
Altitude
Receiver Battery
Voltage
Temperature
Variometer
Motive Power Battery
(Voltage/Capacity)
Rotation Speed
Altitude
XG14English.indd 79 2013/07/16 16:41
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info