606954
9
Zoom out
Zoom in
Previous page
1/112
Next page
7
Notes▋on▋stick▋tension▋spring▋adjustment▋and▋the▋
throttle▋stroke▋travel▋adjustment▋plate
This▋allows▋adjustment▋of▋the▋
stick▋spring▋strength.
① Be certain to remove the battery before carrying
out any adjustments.
② Remove the screws in the eight(8)locations on
the rear case.
③ Adjust the springs to the desired spring tension.
By carefully adjusting each of the screws, you
can achieve a range of spring tensions.
④ Close the rear cover, and tighten the screws.
Take care of the interlocking of levers, etc.
If you prefer a ratchet on the throttle, replace the
spring plate as shown in the drawing on the left
at the bottom of this page.
The drawing on the right shows the default
setting, giving a smooth throttle transition.
NeverTouchthePrintedCircuitBoardor
anyrelatedpartsinsidethetransmitter.
For the Throttle
For the Aileron
For the Elevator
For the Rudder
Screws X 8
Detail of this area.
Direction of the springDirection of the spring
supporting surface
Direction of the springDirection of the spring
supporting surface
Touching the board may result in electric shock, uncontrolled microcomputer
operation, or damage to model data, and normal operation may become impossible.
For Airplane For Helicopter
CONVEX
Mode 1 Example
Screw to secure spring
Screw for spring adjustment
Screw to secure spring
Screw for spring adjustment
※Ratchet operation ※Smooth operation
準備
XG14English.indd 7 2013/07/16 16:38
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info