606954
8
Zoom out
Zoom in
Previous page
1/112
Next page
6
Inserting▋and▋Removing▋the▋transmitter▋battery
1) While pressing the embossed mark on the rear surface of the battery lid, Slide the lid in arrowed direction of
the arrow. And remove.
2) Carefully insert the rechargeable battery connector into the transmitter battery connector.
3) Fit the rechargeable battery into the battery box together with lling sponge, and mount the battery cover,
taking care not to pinch the lead wires. During the charging, the transmitter LED will light in a reddish purple
color. When charging has been completed, the LED will switch off. The standard charging time is
approximately 3hours..
Charging▋the▋Transmitter▋Battery
Before charging the battery, be certain to read the precautions written on the battery label.
The transmitter operates exclusively with genuine JR Li-Fe batteries. Do not use the transmitter with other
rechargeable batteries or with dry cell batteries.
During charging, the transmitter should be switched o󰮏. When the transmitter ON, charging will not take place.
Note that if using a ight simulator with the control cable plugged into the trainer jack (and the power switch OFF
on the transmitter), it is possible to plug the charge cable into the transmitter and use the AC adaptor to supply
power. Since the built-in battery will not be used, this will allow enjoyment while conserving energy.
1) Insert the AC adaptor into the AC electric power socket.
2) Insert the plug of the AC adapter as far as it will go into the DC power jack of the transmitter. If the LED of the
transmitter does not illuminate, an error may have occurred. In this situation, detach the AC adapter plug. And
re-insert it. If the LED does not light even after the cable has been removed and inserted several times, Please
contact your JR agent or Distributor in your country.
3) During the charging, the LED of the transmitter will light reddish Purple. When charging is complete, the LED
will switch o󰮏. The standard charging time is approximately 3hours.
4) After charging has been completed, promptly detach all the connections. Absolutely do not leave the charger
connected to the transmitter.
Be certain to only use the genuine JR XG14 dedicated AC adapter (NEC-A912C). Charging cannot be carried out
using other AC adapters. Further, do not use this AC adapter for charging products other than the XG14.
WARNING
WarningAbnormalheatgenerationmaycauseexplosionofthebattery!
After charging is complete, quickly detach all of the connections including the AC adaptor from outlet.
Never leave the AC adaptor connected to the transmitter or plugged into the AC outlet. This is to avoid
possible re risk after charging the battery.
Do not use the AC adapter while the cord is still bundled together, since there will be a
risk of heat generation.
Battery box
Battery connector
Battery cover
※※※※
※※※※
※※※※
※※※※
※※※※
9V 12W AC Adaptor for Recharging(NEC-A912C)
※Note: This adaptor can only be used when plugged
into the XG14 - it is not a stand alone charger.
To the Recharging Power Source jack
(Exclusively for transmitters with
built-in Li-fe rechargeable batteries)
Do not use the AC adapter while the cord is still bundled
together, since there will be a risk of heat generation.
CAUTION
To the AC Electric Power Outlet
Power source jack for
recharging (DC9V)
When removing the connector, press the lever part
to release the lock while pulling out the connector.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
Preparation
Battery box
Battery connector
Battery cover
※※※※
※※※※
※※※※
※※※※
※※※※
9V 12W AC Adaptor for Recharging(NEC-A912C)
※Note: This adaptor can only be used when plugged
into the XG14 - it is not a stand alone charger.
To the Recharging Power Source jack
(Exclusively for transmitters with
built-in Li-fe rechargeable batteries)
Do not use the AC adapter while the cord is still bundled
together, since there will be a risk of heat generation.
CAUTION
To the AC Electric Power Outlet
Power source jack for
recharging (DC9V)
XG14English.indd 6 2013/07/16 16:38
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info