Manual JRC Radar1000_MKII (page 20 of 49) (English)

28352

Zoom out

Zoom in

1/49

Usually, the mounting surface for the

scanner unit should be parallel with

the ship’s waterline. Some vessels,

however, may adopt a higher bow

angle at some cruising speeds. This

substantially alters and raises the

radar’s radiation plane. In this case

nearby target detection might be

poor. It may be helpful to lower the

radar beam towards the FORWARD

parallel by shimming the radar ped-

estal in order to tilt the beam angle

slightly downward with respect to

the waterline.

3.5 CONNECTING THE SCANNER UNIT CABLE

The scanner unit is supplied with an interunit cable, which includes a plug (P1)

for connection to the display unit. If your installation does not allow you to run

the cable with the plug (P1) attached, the wire cable can be disconnected and

reconnected inside the scanner unit. When reconnected, be sure to include the

cable clamp, the rubber grommet, and the clamping plate.

MAIN BEAM

WATERLINE

FORWARD

USING SHIMS TO

TOWER THE MAIN BEAM

WEDEGE or

WASHERS

IDEAL RADIATION PLANE

INTERUNIT CABLE

CABLE CLAMP

INTERUNIT CABLE

CLAMPING PLATE

RUBBER GROMMET

CABLE

INSTALLATION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1000_MKII in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JRC Radar1000_MKII Manual

Product: