28307
233
Zoom out
Zoom in
Previous page
1/310
Next page
217
No. Condition of the Breakdown Conceivable Cause
5 Only noise is displayed and
no radar image is displayed
(characters and markers
are, however, displayed).
a. Modulator (JMA-2343: CME-307, JMA2344: CME-308)
b. Defective magnetron
c. Breakdown in the main control circuit (CMC-1156)
d. Defective tuning voltage
6 While radar images are
displayed, the characters
and markers are not
displayed.
a. Breakdown in the main control circuit (CMC-1156).
7 Reception is poor. a. Deterioration or fault in the magnetron
b. Breakdown in the modulator (JMA-2343: CME-307,
JMA-2344: CME-308). Defect in the pulse width
switching?
c. Breakdown in the receiver (JMA-2343: CAE-457,
JMA-2344: CAE-457-1)
d. Water damage to the radiation unit or cables between
equipment (soiling of the radiation unit, adherence of
ice or snow, internal erosion of the cable between
equipment)
e. Defective tuning voltage
f. Interruption in the pulse switching signal (PW)
8 The image is warped or
drifts.
a. Breakdown or defective adjustment of the monitor
b. Interruption in the synchronizing signal for horizontal
signal (HS) and vertical signal (VS)
c. Breakdown in the CRT monitor circuit (CNN-366)
9 Nothing happens on the
screen when the fixed
distance marker, variable
distance marker, electronic
cursor or panel lighting
switches are pushed.
a. The brightness adjustment is at the minimum level.
b. Breakdown in the main control circuit (CMC-1156)
10 The screen returns to the
initial state during operation.
a. The electric power of the ship is inadequate.
b. Breakdown in the main control circuit (CMC-1156)
c. Breakdown in the power supply unit
11 The alarm does not activate. a. Breakdown in the main control circuit (CMC-1156)
12 The radar wake does not
operate.
a. Breakdown in the main control circuit
b. The image brightness is too low.
13 The display does not
change to true bearing
(north-up) or course up.
a. There is no data being received from the bearing
sensor (NMEA).
233


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC JMA2343 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC JMA2343 in the language / languages: English as an attachment in your email.

The manual is 17,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info