Manual Jotul F 476 (page 14 of 108) (English, Dutch, French, Italian, Spanish)

467791

Zoom out

Zoom in

1/108

Fig. 19

6. When both side panels have been mounted, push them right

up to one another along the back edge and fasten at the top

only with a mount (Fig. 19 A).

7. Move the top plate into place and align carefully.

8. Finally, tighten all the screws.

9. If necessary, place the cover for the smoke outlet and inlet

air in the back edge.

10. Refit any parts that have been removed from the product.

4.5 Fitting a flue pipe with a top outlet

NB! With a top outlet, the flue pipe is installed after the outer

sides have been installed.

The product is supplied from the factory with the smoke outlet

fitted for the top outlet.

NB: It is important to remove the white foam plastic in the top!

1. Place the product in the correct position.

2. Place the top plate and the grate on top of the product.

3. Place the gasket on the edge of the flue pipe as illustrated

in Fig. 14 B.

4. Move the flue pipe into position.

NB: It is important for the joints/flue pipes to be sealed

completely. Air leaks may prevent them from operating properly.

4.6 Adjusting the burn chamber

height for the Jøtul F 470 SHD Series

Any unevenness between the burn chamber and the base/

pedestal/foot must be corrected.

This may also be done to reduce pressure on the draught valves

(prevents draught valves from becoming stiff).

Fig. 20

1. If the base has been mounted, the shelf and the inner plate

must be removed first.

2. Unscrew the screws (fig. 20 A) approx. 4 mm on both sides

of the product.

3. Unscrew B using an Allen key until you feel resistance in

the key. Then turn the adjustment screw to raise the burn

chamber as much as required.

4. Finally, tighten screws A.

5. Refit the base inner plate and shelf (only for base).

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jotul F 476 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jotul F 476 Manual

Product: