Manual Jotul F 476 (page 13 of 108) (English, Dutch, French, Italian, Spanish)

467791

Zoom out

Zoom in

1/108

Cast iron sides

Fig. 16

1. If installing the flue pipe at the back, first drill a hole in the

removable cover plates (Fig. 16 A) before they are knocked out.

2. Loosen the screws on the top (Fig. 15 A).

3. Put the sides on and secure with screws on the top.

4. Lock the sides onto the underside with screws (M8x16)

(Fig. 6 A) that are in the bag of screws. The sides should fit

into the slots along the back edge. Tighten the screws while

holding the sides in the correct position so that they do not

slip out of place.

5. Refit any parts that have been removed from the product.

Soapstone side panels, Jøtul F 476 SHD

The side panels come in two packages. A bracket is mounted onto

each soapstone side panel.

Fig. 17

1. Move the bracket (Fig. 17 A) to the opposite position on one

of the soapstone side panels. This should only be done if the

bracket is not located in the upper position. Do not tighten

the screws so much that the bracket cannot be moved up and

down with your hand. Make sure the bracket on the other

side panel is equally as loose.

Fig. 18

2. Loosen the screws (Fig. 18 A) on the top.

3. Raise a soapstone side panel at the end in which the bracket

is mounted and place it into the base. Push the bracket until

it is at the same height as the screw hole (Fig. 18 A) on the

burn chamber. Then push the upper section of the soapstone

side panel up to the burn chamber and attach the screw

(Fig. 18 A). Do not tighten the screw yet.

4. Then fit the other side panel in the same way.

5. Attach the side panels onto the underside with screws

(Fig. 6A) from the bag of screws. Do not tighten the screw yet.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jotul F 476 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jotul F 476 Manual

Product: