Manual Jotul F 474 (page 19 of 108) (English, Dutch, French, Italian, Spanish)

467790

Zoom out

Zoom in

1/108

Fig. 27

4. If it is just the gasket that goes against the front of the burn

chamber that needs to be replaced (Fig. 27 A), the gasket

groove can be cleaned and a new gasket can be glued into

place.

5. If replacing a glass gasket or glass, unscrew the closing

mechanism that is attached with screws and washers (Fig. 27 B).

6. Remove the glass holders (Fig. 27 C) that are attached with

4 screws (Fig. 27 D).

7. Lift out the glass.

Fig. 28

8. Thoroughly clean the gasket groove and glue new gaskets

into place: The glass gasket (Fig. 28 A), door gasket (Fig. 28

B) and the gasket under the glass (Fig. 28 C). Make sure the

door gaskets fit right into the corners (Fig. 28 D).

Fig. 29

9. Place the glass holders on a soft material with the side, as

illustrated (Fig. 29 A), turned up.

10. Apply a bead of glue into the gasket groove (Fig. 29 B) which

is now facing up.

11. Fit the gasket (Fig. 29 C) into the groove with the ends sticking

out as illustrated (11 cm on one side).

Fig. 30

12. Turn the glass holders and apply a bead of glue into the gasket

grooves. Note the overlap (Fig. 30 A).

13. When refitting, follow the same procedure in reverse order.

Remember to place a washer under the hinge.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jotul F 474 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jotul F 474 Manual

Product: