Manual Jotul F 474 (page 12 of 108) (English, Dutch, French, Italian, Spanish)

467790

Zoom out

Zoom in

1/108

Fig. 14

7. Unscrew the cover for the rear outlet on the inside of the burn

chamber and take it out through the door opening.

8. Attach the smoke outlet (Fig. 14 A) to the inside of the burn

chamber where the cover was. Note that it must be turned so

that the flue pipe can be pushed into place from the outside.

9. Place the gasket (Fig. 14 B) from the bag of screws around

the edge of the flue pipe and push it into the smoke outlet.

10. Install the smoke outlet cover where the outlet was.

11. Refit the exhaust deflector and baffle.

NB: It is important for the joints/flue pipes to be sealed

completely. Air leaks may prevent them from operating properly.

4.4 Assembling the sides

Aluminium or glass sides

If you are installing aluminium sides and the flue pipe is rear-

mounted, you will need to saw holes for this using a hacksaw

blade.

Fig. 15

1. Loosen the screws on the top (Fig. 15 A).

2. Attach the lower bracket (Fig. 15 B) with the screw (Fig. 6 A)

from the bag of screws.

3. If you are installing aluminium sides, glue the gaskets (Fig. 15 C)

onto all the brackets.

4. Move the aluminium/glass side into position in the section.

NB! If there is a crack between the aluminium panels and

the brackets, an extra gasket (Fig. 15 C) should be glued to

the bracket at the place where the crack is.

5. Move the upper section into position and secure loosely

with screws.

6. Do the same on the opposite side.

7. Adjust the sides at the back edge.

8. Refit any parts that have been removed from the product.

9. Finally, tighten all the screws.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jotul F 474 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jotul F 474 Manual

Product: