Manual Jotul F 474 (page 11 of 108) (English, Dutch, French, Italian, Spanish)

467790

Zoom out

Zoom in

1/108

4.3 Chimney and flue pipe

• The fireplace must only be connected to a chimney and

flue pipe approved for solid fuel fireplaces with flue gas

temperatures as specified in «1.0 Technical Data».

• The cross-section of the chimney must be designed to fit the

fireplace. Use «1.0 Technical Data» to calculate the correct

chimney cross-section.

• The chimney must be connected in accordance with the

installation instructions of the chimney supplier.

• Before a hole is made in the chimney, the product should be

test-mounted in order to correctly mark the position of the

fireplace and the hole in the chimney. See Fig. 1 for minimum

dimensions.

• Make sure that the flue pipe rises all the way up to the

chimney.

• With a rear outlet, use a flue pipe bend with a sweep hatch

to allow sweeping.

• Please note that it is extremely important for connections to

have a degree of flexibility. This is to prevent any movement

in the installation leading to the formation of cracks.

• For recommended chimney draught, see «1.0 Technical Data».

For flue pipe dimensions with the relevant cross-section, see

“1.0 Technical Data”.

NB! The minimum recommended chimney length is 3.5 m from

the flue pipe insert. If the draught is too strong, a flue pipe

damper can be installed and used to reduce the draught.

Fitting a flue pipe with a top outlet

With a top outlet, the flue pipe is installed after the outer sides

have been installed. See Chapter 4.5.

Fitting a flue pipe with a rear outlet

The product is supplied from the factory with the smoke outlet

fitted for the top outlet. NB: It is important to remove the white

foam plastic in the top. Proceed as follows for installation with

a rear outlet:

1. Place the product in the correct position. See Fig. 1.

2. Unscrew the smoke outlet from the top outlet.

3. Open the door and place it securely in the upper position by

closing the handle.

Fig. 12

4. Remove the lower exhaust deflector (Fig. 12 A) by tapping/

sliding it forwards and out. Hold it while doing this so that

it does not fall down.

5. Pull the baffles (fig. 12 B) forwards, lift slightly, turn and lower

them.

Fig. 13

6. Be sure to note how the exhaust deflectors (Fig. 13 A) are

positioned before removing them to ensure that they are

fitted back into exactly the right place. Take hold of the pin

(Fig. 13 B) on the underside of the exhaust deflectors, lift them

up slightly and then sideways before lowering and removing

them from the burn chamber.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jotul F 474 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jotul F 474 Manual

Product: